Panasonic M282737F Manual Do Utilizador

Assembly (continued)

5. Connect powe r cord

to batte ry

Connect the sprayer’s batte ry power cord to the vehicle battery using the

following proce dure:

a) Disconnect the vehicle battery ground wire.
b) Connect the remote switch’s red battery clamp or red wire connector to the

positive (+) terminal of the battery.

c) Connect the remote switch’s black battery clamp or black wire connector to

the negative (-) terminal of the battery.

d) Reconnect the vehicle battery ground wire.

W ARNING: Always connect in this sequence to avoid possible shock.

6. Ve rify conne ction

Ve rify a complete conne ction has been made by checking with a DC voltmeter,
or briefly connecting to the pump power cord and listening for pump activation.

7. Connect all three

powe r cord together

Connect the three sprayer powe r cords toge the r.
a) Check to be sure the power switch is in the “ OFF” position on the remote

switch power cord.

b) Connect the one end of the remote switch power cord to the battery power

cord and the other end to the pump power cord.

8. Attach remote switch

to vehicle

Using supplie d velcro pads, affix remote switch to vehicle in a position that is
easily reache d from the drive r’s seat.

9. Disconne ct afte r use

AFTER EAC H USE, disconnect powe r to the spraye r by disconnecting the
sprayer’s remote switch power cord from the battery power cord – the battery
power cord m ay rem ain connected to the battery.

NOTE: It is im portant to disconnect power to the sprayer when not in use for
safety reasons. ALWAYS verify that the power has been disconnected or the
rem ote switch is in the OFF position before adding chem icals or servicing.

01981

Battery power cord

Remote switch

power cord

Pump power cord

To Battery