Snapper 150Z Series Manual Do Utilizador

6

This unit has been designed and manufactured to
provide you with the safety and reliability you would
expect from an industry leader in outdoor power
equipment manufacturing.

Although reading this manual and the safety instructions
it contains will provide you with the necessary basic
knowledge to operate this equipment safely and
effectively, we have placed several safety labels on the
unit to remind you of this important information while you
are operating your unit.

All  DANGER,  WARNING,  CAUTION  and instructional
messages on your rider and mower should be carefully
read and obeyed. Personal bodily injury can result when
these instructions are not followed. The information is for
your safety and it is important! The safety decals below
are on your rider and mower.

If any of these decals are lost or damaged, replace them
at once. Contact your dealer for replacements.

These labels are easily applied and will act as a constant
visual reminder to you, and others who may use the
equipment, to follow the safety instructions necessary for
safe, effective operation.

The exhaust pipe and surrounding 
surfaces are hot and can cause 
burns.
Avoid contact with hot surfaces.

173xxxx

1733458

1734276

1704276

1704277

1734272

1734276

Sit in the seat.

Move the ground speed levers to START/PARK 
positions (move both levers out).

Move parking brake control to ENGAGE position.

Turn the mower blades OFF (push switch down).

Move engine speed control to FAST position 
(levers full forward). 

Pull the choke knob up to CLOSED position.

Turn ignition switch to START to crank the engine.

After the engine starts:
 

-release the ignition switch key (it will return to RUN position)

 

-push the choke knob down to OPEN position

Always set the engine speed to FAST for mowing.

To Turn On the Mower Blades:
1. Sit in seat.
2. Start the engine (see “To Start Engine”).
3. Pull the mower blade switch UP to
    turn the mower blades ON.

To Stop the Engine:
1. Move ground speed levers to
    START/PARK.
2. Move parking brake lever to 
    ENGAGE position.
3. Move engine speed control 
    to SLOW.
4. Turn ignition switch to OFF.

To Turn the Mower Blades Off:
1. Push the mower blade switch DOWN to
    turn the mower blades OFF.

To Drive:
1. Start the engine (see “To Start Engine”).
2. Move parking brake control to 
    DISENGAGE position.
3. Move both ground speed levers in from
    PARK position.
4. Move levers as shown to travel.

Keep hands and feet 
away from deck.

Do not operate mower 
unless discharge chute 
or entire grass catcher 
is in its proper place.

7101665

Keep hands and feet 
away from deck.

Do not operate mower 
unless discharge chute 
or entire grass catcher 
is in its proper place.

7101665