Rhino Mounts FN180 Manual Do Utilizador
ASSEMBLY
FN180/FN120 01/11
Assembly Section 3-9
© 2011 Alamo Group Inc.
ASSEMBL
Y
Driveline Clamp Cone Yoke Operating Instructions
Remove the two 5/8”-11 bolts from the driveline
clamp yoke and slide yoke onto the shaft and align
holes with annular groove of gearbox shaft.
Reinstall bolts and tighten to 130 ft.-lb. torque. Push
and pull the driveline to ensure it is securely
attached to the shaft. Regularly check the driveline
yoke to ensure a tight connection. To remove the
yoke, remove the bolts and pull yoke off the shaft.
clamp yoke and slide yoke onto the shaft and align
holes with annular groove of gearbox shaft.
Reinstall bolts and tighten to 130 ft.-lb. torque. Push
and pull the driveline to ensure it is securely
attached to the shaft. Regularly check the driveline
yoke to ensure a tight connection. To remove the
yoke, remove the bolts and pull yoke off the shaft.
Mower is now assembled and ready for pre-delivery
checks.
checks.