McCulloch 422800 Manual Do Utilizador

•  Press lift lever plunger and raise attachment lift lever 

to its highest po si tion.

•  Release parking brake by depressing clutch/brake 

ped al.

•  Place gearshift lever in neutral po si tion.

•  Roll tractor forward off skid.
•  Remove banding holding deflector shield up against 

tractor.

•  Lift seat pan to raised position.
•  If this battery is put into service after month and year 

indicated on label (label located between terminals) 

charge battery for minimum of one hour at 6-10 amps. 

(See "BATTERY" in MAINTENANCE section of this 

manual for charging instructions).

NOTE: You may now roll your tractor off the skid. Follow 

the appropriate instruction below to remove the tractor 

from the skid.

  WARNING: Before starting, read, un der stand and follow 

all in struc tions in the Operation section of this manual. Be 

sure tractor is in a well-ventilated area. Be sure the area in  

front of tractor is clear of other people and objects.

Adjust seat before tightening adjustment bolt.
• 

Remove adjustment bolt, lock washer and flat washer 

se cur ing seat to cardboard packing and set aside for 

as sem bly of seat to tractor.

• 

Pivot seat upward and remove from the cardboard pack-

ing. Remove the cardboard packing and discard.

•   Place seat on seat pan so head of shoulder bolt is 

positioned over large slotted hole in pan.

• 

Push down on seat to engage shoulder bolt in slot and 

pull seat towards rear of tractor.

•  Pivot seat and pan forward and assemble adjustment 

bolt, lockwasher and flat washer loosely. Do not tighten.

•  Lower seat into operating position and sit on seat.
• 

Slide seat until a comfortable position is reached which 

allows you to press clutch/brake pedal all the way down.

•  Get off seat without moving its adjusted position.
•  Raise seat and tighten adjustment bolt securely.

24

66

02464