Holder C 9.78 H Manual Do Utilizador
C 9700 ... C 9.88 H
Operating Instructions
194
145 052
Maintenance Every 1500 Service Hours
Checking or Cleaning the Implement Hydraulics
Suction Filter
Suction Filter
-
Remove the mounting pin (4) of the hydraulic cylinder
(5).
(5).
-
Remove the banjo screw (3).
-
Remove the filter cover fastening screws (2).
-
Withdraw the filter housing with the sieve-star filter.
ATTENTION
Observe the instructions for handling fuels
and lubricants.
Observe the instructions for handling fuels
and lubricants.
Cleaning:
-
Wash the sieve-star filter with clean Diesel fuel.
Replacement:
-
Unscrew the sieve-star filter from the filter housing
with a 24mm open-ended wrench.
with a 24mm open-ended wrench.
-
Screw the new filter with a new toroidal sealing ring on
to an the filter housing.
to an the filter housing.
The installation of the suction filter is carried out in the reverse
order of removal.
order of removal.
If an implement variable pump* or power hydraulic system*
is installed, an additional sieve-star filter is installed in the
flange (1). If so, it must also be cleaned or changed as
described above.
is installed, an additional sieve-star filter is installed in the
flange (1). If so, it must also be cleaned or changed as
described above.
Bild_142
5
4
3
2
1
* Option