Husqvarna PZ6029D Manual Do Utilizador

Página de 72
CONTROls
20
Tracking Knob
If the mower is not tracking straight, check the 
air pressure in both rear tires. Recommended air 
pressure for the rear tires is 15 psi (1 bar).
Tracking adjustments are made using the tracking 
1. 
bolt and tracking knob. The tracking bolt and 
tracking knob act as limiting devices for the 
motion control levers when in the full-forward 
position.
For preliminary tracking adjustment, move unit 
2. 
to an open, unobstructed area such as an empty 
parking lot or open field.
Back the tracking bolt out until flush with nut.
3. 
Loosen tracking knob out until flush with nut.
4. 
Test operate unit by driving it at full throttle and 
5. 
the full forward position on both motion control 
levers. Gradually turn in the tracking bolt on the 
right hand side until the unit noticeably starts 
drifting right.
Drive forward at full throttle with both motion 
6. 
control levers in the full forward position. 
Gradually turn in the tracking knob (left side) until 
unit tracks straight.
8065-060
Tracking adjustment
Parking Brake
The parking brake is found on the left of the machine. 
Pull the lever backward to activate the brake and 
push forward to release it.
IMPORTANT INFORMATION
The machine must stand absolutely still when 
applying the parking brake. Always set the 
parking brake before dismounting. Release the 
parking brake before moving the mower.
8065-006
Parking brake