Husqvarna 03002 Manual Do Utilizador

ASSEMBLY

Fig. 5

NOTE: Be su

re mower side suspension arms (A) are pointing

forward before sliding mower under tractor.
• Slide mower under tractor until it is centered under

tractor.

TO INSTALL MOWER

(See Figs. 4-12)

Be sure tractor is on level surface and engage park ing brake.
• Lower attachment lift lever to it's lowest position.

CAUTION: Lift lever is spring loaded.

Have a tight grip on lift lever, lower it

slowly and engage in lowest position.

02965

Fig. 4

ASSEMBLE FRONT WHEEL TO MOWER

(See Fig. 3)

• Using shoulder bolt, washer and locknut from parts

bag, as sem ble front wheel to mower as shown. Tighten

securely.

Fig. 3

• Turn steering wheel to the left as far as it will go and

position mower on right side of tractor with deflector

shield to the right.

NOTE: You may now roll your tractor off the skid. Follow the

instructions below to remove the tractor from the skid.

WARNING: Before start ing, read, un der stand and fol low

all in struc tions in the Op er a tion section of this man u al. Be

sure tractor is in a well-ventilated area. Be sure the area in

front of tractor is clear of other peo ple and objects.

TO ROLL TRACTOR OFF SKID (See Op er a tion

section for location and function of con trols)

• Raise attachment lift lever to its highest po si tion.
•

Release parking brake by de press ing clutch/brake ped al.

• Place freewheel control in "trans mis sion dis en gaged"

position (See “TO TRANS PORT” in the Op er a tion

section of this manual).

• Roll tractor forward off skid.
Continue with the instructions that follow.

TO ADJUST SEAT (See Fig. 2):

• Grasp adjustment handle(A) and pull up, slide seat to

desired po si tion and release adjustment handle.

Fig. 2

• FIRST INSTALL ANTI-SWAY BAR (S).

•

From right side of mower, insert anti-sway bar into

hole in transmission bracket (T).

Fig. 6