Ariens 985117 Manual Do Utilizador

Página de 24
 
GB - 8
Keep the nozzle in contact with the rim of the fuel tank or 
container opening at all times until fueling is complete. 
Do not use a nozzle lock-open device.
If fuel is spilled on clothing, change clothing immediately.
Battery posts, terminals and related accessories contain 
lead and lead compounds, chemicals known to the State 
of California to cause cancer and reproductive harm. 
Wash hands after handling.
Reverse connections may cause sparks which may result 
in injury. ALWAYS connect/disconnect cables in proper 
order.
Poisonous battery fluid contains sulfuric acid and its 
contact with skin, eyes, or clothing can cause severe 
burns.
Explosive Gases! No flames, No sparks, No smoking 
near battery.
ALWAYS wear safety glasses and protective gear near 
battery.
DO NOT TIP battery beyond a 45° angle in any direction.
ALWAYS keep batteries out of reach of children.
Before making any inspections, repairs, etc.: disengage 
PTO, stop unit and engine, remove key, allow moving 
parts to stop.
Allow hot parts to cool.
ALWAYS block wheels, engage parking brake and know 
all jack stands are strong, secure and will hold weight of 
unit during maintenance.
An extension spring, when extended, stores energy and 
can be dangerous. Always use tools specifically designed 
for installing or removing an extension spring. Always 
compress or extend springs slowly.
ALWAYS maintain unit in safe operating condition. 
Damaged or worn out muffler can cause fire or explosion.
Keep hardware, especially blade attachment bolts, tight.
Maintain or replace safety and instruction labels, as 
necessary.
For unit storage or extended storage:
NEVER store with fuel in fuel tank, inside a building 
where any ignition sources are present.
Allow engine to cool completely.
Use only attachments or accessories designed for your 
unit.
Check attachment components frequently. If worn or 
damaged, replace with manufacturer’s recommended 
parts.
Use extra care with grass catchers and other 
attachments. These can change the stability of the unit. 
Use only approved hitch points.
ALWAYS be aware of attachments when turning. 
ALWAYS allow adequate clearance between 
attachments, personnel, and other objects.
 
TOOLS REQUIRED
 
Phillips Screwdriver, Needle Nose Pliers, Open-End 
Wrench: 3/8, 7/16, 9/16 & 3/4 and/or Adjustable Wrench
 
REMOVE UNIT FROM CARTON
 
Remove the unit and components from the shipping 
container.
 
ASSEMBLY
 
WARNING: 
 
AVOID INJURY. Read and 
understand entire 
 
Safety 
 
section before 
proceeding.
Figure 4
Handlebar
Assembly
Fwd-Rev
Control
Rod
Hi-Lo
Control Rod
Tractor
Assembly
Optional
Brake Handle
Assembly
Brake Rod, RH
Brake Rod, LH
DH0010