Ariens 932035 - 724 Manual Do Utilizador

GB - 28

9. Reinstall tires with clip pins.

10. Set unit upright.

11. Replace spark plug wire on spark plug.

IMPORTANT: NEVER spray unit with high 
pressure water or store unit outdoors.
Run with attachment clutch engaged a few 
minutes after each use to free unit of any 
loose or melting snow.
Inspect unit for visible signs of wear, breakage 
or damage.
Keep all nuts, bolts and screws properly 
tightened and know unit is in safe working 
condition.
Store unit in a cool, dry protected area.

Clean unit thoroughly with mild soap and low 
pressure water and lubricate (see 
Maintenance). Touch up all scratched painted 
surfaces.
Remove weight from wheels by putting blocks 
under frame or axle.
When storing unit for extended periods of time, 
remove all fuel from tank and carburetor (run 
dry). Refer to Engine Manual.

WARNING: AVOID INJURY. Read 
and understand Storage Safety 
Rules in Safety section before 
proceeding.

1. Fuel tank is empty.
2. Build up of dirt and residue 

around governor/
carburetor.

3. Key Switch not in run 

position.

4. Ignition switch starter 

circuit not functioning.

1. Fill fuel tank.
2. Clean area around governor/

carburetor.

3. Put Key Switch into run position.
4. Check for a bad starter or 

connections.

1. Out of fuel.
2. Mechanical jam in blower 

rake or impeller.

3. Polluted fuel supply.
4. Faulty spark plug.

1. Fill fuel tank.
2. Turn off engine, remove key, and 

wait for all moving parts to stop. 
Check for and remove 
obstruction and repair before 
restart.

3. Replace with clean fuel.
4. Replace or clean spark plug.

1. See Engine Manual.

1. Friction disc not adjusted 

properly.

2. Traction belt not 

functioning.

1. Repair or replace friction disc. 

See Service and Adjustments.

2. Repair or replace traction drive 

belt. See Service and 
Adjustments.