American Standard 2709.028WC.K2 Folheto
H49
© 2008 AS America Inc.
ELLISSE OVAL™
WHIRLPOOL AND BATHING POOL
HIGH GLOSS
Rev. 2/08
ELLISSE OVAL™ WHIRLPOOL AND
BATHING POOL
BATHING POOL
❏
2709.028WC Whirlpool featuring System II
• Acrylic with fiberglass reinforcement
• Pre-leveled tub bottom
• Factory installed power cord and plug
• Six multi-directional and flow-adjustable body
massage jets
• Pre-Drilled for grab bars (purchased separately)
• Two silent air volume controls
• Quick Connect Safe-T-Heater
connection system
• Factory installed and tested whirlpool system
• 2.1 HP, two speed self-draining pump/motor
with dry run seal and Pulse feature
• Deck-mounted electronic On/Off with 20 minute
built-in timed safety shut off and chrome bezel
• EverClean
• Pre-leveled tub bottom
• Factory installed power cord and plug
• Six multi-directional and flow-adjustable body
massage jets
• Pre-Drilled for grab bars (purchased separately)
• Two silent air volume controls
• Quick Connect Safe-T-Heater
connection system
• Factory installed and tested whirlpool system
• 2.1 HP, two speed self-draining pump/motor
with dry run seal and Pulse feature
• Deck-mounted electronic On/Off with 20 minute
built-in timed safety shut off and chrome bezel
• EverClean
®
System
❏
2709.028WC.K2 Whirlpool Massage
with Chromatherapy
Same as 2709.018WC but also includes:
• Two digitally controlled lights
• Electronic control with color selector and
color cycle function
• Two digitally controlled lights
• Electronic control with color selector and
color cycle function
❏
2709.002 Bathing Pool only
Nominal Dimensions:
1759 x 978 x 502mm
(69-1/4" x 38-1/2" x 19-3/4")
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
American Standard whirlpools and air baths with
EverClean
EverClean
®
incorporate a patented silver-ion
additive right into the circulation piping to protect
the pipes from mold, mildew, algae and fungus that
could cause deterioration or staining of the pipes.
the pipes from mold, mildew, algae and fungus that
could cause deterioration or staining of the pipes.
SEE REVERSE FOR PRODUCT DIMENSIONS
AND SPECIFICATIONS
AND SPECIFICATIONS
To Be Specified - Required:
❏
❏
Color:
❏
Bath Filler: (specify finish)
❏
Bath Drain: 1583.470 (specify finish)
❏
Grab Bar Kit: 9827-200-two per kit (specify finish)
To Be Specified - Optional:
❏
❏
Safe-T-Heater*: 9075.120
❏
Jet Trim Ring Kit: 9860.200-two per kit (specify color)
❏
System II Control Bezel: 9861.100 (specify finish)
❏
Air Blower Remote Mounting Kit: 754025-0071A
For color/finish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.
temperature during operation. It will not heat cold water to
desired bathing temperature.