American Standard 2425EC-LHO Folheto
WILLIAMSBURG ELITE™ 5’ INTEGRAL APRON
WHIRLPOOLS BY AMERICAN STANDARD
HIGH GLOSS ACRYLIC
WILLIAMSBURG ELITE™ 5’ INTEGRAL APRON
WHIRLPOOL
WHIRLPOOL
Comfortable bathing design with form-fitted
backrest and molded-in armrests
backrest and molded-in armrests
❏
2425E-LHO Left Hand Drain Outlet
(specify White 020, Bone 021, or Linen 222)
❏
2425E-RHO Right Hand Drain Outlet
(specify White 020, Bone 021, or Linen 222)
• Acrylic with fiberglass reinforcement
• Integral apron with removable access panel
• Integral three-sided, tiling / water retention
• Integral apron with removable access panel
• Integral three-sided, tiling / water retention
flange
• 1.5 HP self-draining pump/motor
with dry run seal
• Eight multi-directional and flow adjustable jets
including:
Two high performance Ideal-flow™ Jets
Six interchangeable Flex-jets™
Two high performance Ideal-flow™ Jets
Six interchangeable Flex-jets™
• Two silent air volume controls
• Deck-mounted On/Off control
• Complete factory installed and tested
• Deck-mounted On/Off control
• Complete factory installed and tested
whirlpool system
❏
2425EC-LHO Left Hand Drain Outlet
(specify White 020, Bone 021, or Linen 222)
❏
2425EC-RHO Right Hand Drain Outlet
(specify White 020, Bone 021, or Linen 222)
• Same as above with the StayClean™
whirlpool system featuring Antimicrobial
AlphaSan®
AlphaSan®
Nominal Dimensions:
60” x 32” x 21-1/2”
60” x 32” x 21-1/2”
(1524 x 813 x 546mm)
© 2003 American Standard Inc.
HD-016
SPS 2425E-LHO/RHO
Revised 6/03
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
* See American Standard Faucet Selector
NOTE: Roughing-in dimensions and product
specifications shown on reverse side of page.
specifications shown on reverse side of page.
Components Needed:
❏
Bath Filler*: (specify finish)
❏
Bath Drain: BATH-DRAIN
(specify Chrome 002, Polished Brass 099,
(specify Chrome 002, Polished Brass 099,
or Satin 295)
Custom Accessories Available:
❏
Pulse Jet Kit: PULSE-JET (two per kit, specify
White 020, Bone 021, or Linen 222)
White 020, Bone 021, or Linen 222)
❏
Soft Jet Kit: SOFT-JET (two per kit, specify
White 020, Bone 021, or Linen 222)
White 020, Bone 021, or Linen 222)
❏
E-Z-Install™ Whirlpool Heater - EZHEAT-100
NOTE: E-Z-Install™ Whirlpool Heater is designed to
maintain water temperature during operation. It will not
heat cold water to desired bathing temperature.
maintain water temperature during operation. It will not
heat cold water to desired bathing temperature.