Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Jacuzzi
  4. EH95
  5. Folheto

Jacuzzi EH95 Folheto

Download
Página de 2
Torretta™ 36 Whirlpool Bath  
Model: EH95
Installation Notes
Refer to installation instructions included with fixture before beginning installation. 
Please confirm product availability and specifications before commencing with any 
installation work. 
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE 
WITHOUT NOTICE.
Ordering Information
Product Code:
EH95 Torretta™ Whirlpool Bath  
Right Hand
• Left hand Drain Location 
• Accessories / Hardware:
 
Trim Kit: 2 HTA Jet Rings #P412
 
Trim Kit: 2 HTC Jet Rings #P413
 
Rotary Drain Kit, 30” Cable #K606
 
Trim Kit: 2 BMH Jet Rings #J869
 
Oval Trim Kit #N557
 
Trim Kit: 2 Neck Jet Rings #P556
• Trim Kit Finishes Available:
 
(827) – Chrome 
 
(898) – Brushed Chrome
 
(815) – Satin Nickel 
 
(829) – Bright Brass
 
(805) – Platinum 
 
(826) – Brushed Nickel
 
(845) – Oil Rubbed Bronze
Technical Specifications
Dimensions
72” L x 35-1/8” W x 22-7/8” H1 x 21” H2 x 23-1/2” H3
(1829 mm) L x (892 mm) W x (581 mm) H1 x (533 mm) H2 x (597 mm) H3
Drain/Overflow
A: 18-3/16” (459 mm) B: 15” (381 mm)  
Cutout
Template Provided P/N: P652000
Total Weight
948 lb (430 kg) / 54 lb/sq. ft. (264 kg/m2)
Operating Gallonage
70 U.S. Gal. (265 Liters)
Product Weight
115 lb (52 kg)
Skirt Mounting
Not Available
Electrical Specifications  
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 20 AMP,  60 Hz.
RapidHeat™: 120 VAC, 15 AMP,  60 Hz.
Heater (Standard)
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N S750000
72"
36"
18"
6-3/4"
15" X 4"
Heater
Motor
Opt.  Service Access
12" H x 18" 
L
Service Access
15-1/4"
© Jacuzzi Whirlpool Bath • 14801 Quorum Drive • Dallas • Texas • 75254 • www.jacuzzi.com
SIDE VIEW
END VIEW
H1
H2
2"
(51 mm)
H3
W
L
TORRETTA 36
(Heater)
(Motor)
MAX. 1/2"
#FS31  12/06
DRAIN/OVERFLOW
A
B
Product Shown: Torretta™ Whirlpool Bath  Right Hand Shown  Model:  EH95
* Measurements  inside unit represent cutout in floor to allow for drain/overflow.
Minimum Service Access dimensions given.