Jacuzzi HE97000 Manual Do Utilizador

Comfort Whirlpool Bath

Installation and Operation 

www.jacuzzi.com

 

Page 19

   

  Do not use oil or oil-based bathtub additives.

If you want to use any kind of bathtub additive, use only a small amount of low-foaming powder or crystal substance; 

the whirlpool action intensifies the foaming properties of soaps. 
The use of certain bathtub oils, bubble baths, and bathtub additives may increase the level of accumulations of bathtub 

residue in the whirlpool system and may cause false reading of the water level sensors. If excess accumulations  

persist, you should discontinue use of these products.

To remove accumulations of bathtub residue from the whirlpool system, it is recommended that a whirlpool bathtub be 

cleaned at least twice a month. For best results, however, we recommend that you clean your whirlpool bathtub after 

each use using, Systems Clean™, our exclusive two-part plumbing system cleaner made specifically for whirlpool 

bathtubs. Systems Clean™ is available through an authorized Jacuzzi Whirlpool Bath Distributor or by calling us direct 

at 1-800-288-4002.

To clean your bathtub, simply use a mild, nonabrasive liquid detergent solution. You can protect and restore the gloss 

to a dulled acrylic surface by applying Meguiar’s #10 Mirror Glaze, a product specifically designed for use on acrylic 

finishes. If Meguiar’s is not available, use a fine grade automotive rubbing compound followed by an application of 

automotive paste wax. 

  Never use abrasive household cleaners on any Jacuzzi Luxury Bath product.

Minor scratches which do not penetrate the color finish can be removed by lightly sanding with 600-grit wet/dry 

sandpaper. Restore the gloss using Meguiar’s Mirror Glaze or automotive paste wax. Major scratches and gouges 

which penetrate the acrylic surface will require refinishing. Call Jacuzzi Luxury Bath to find a service agent in your area.