Black Box MPSH16-D20-120V Manual Do Utilizador

 

•  6.  State or Province:  The name of the state or province where the Outlet 

Managed PDU will be located (e.g., California.)

•  7.  Locality:  The city or town where the Outlet Managed PDU will be 

located (e.g., Irvine.)

•  8.  Country:  The two character country code for the nation where the 

Outlet Managed PDU will be located (e.g., US.)

•  9.  Email Address:  An email address, that can be used to contact 

the person responsible for the Outlet Managed PDU (e.g., jsmith@

yourcompany.com.)

•  10. Organizational Name:  The name of your company or organization 

(e.g., Western Telematic.)

•  11. Organizational Unit:  The name of your department or division; if 

necessary, any random text can be entered in this field (e.g., tech support.)

4.  After you have defined parameters 5 through 11, type 

12 and press [Enter] 

to create a Certificate Signing Request.  By default, this will overwrite any 

existing certificate, and create a new Self Signed certificate.
a)  The Outlet Managed PDU will prompt you to create a password.  Key 

in the desired password (up to 16 characters) and then press [Enter].  

When the Outlet Managed PDU prompts you to verify the password, 

key it again and then press [Enter] once.  After a brief pause, the Outlet 

Managed PDU will return to the Web Access Menu, indicating that the 

CSR has been successfully created.

b)  When the Web Access Menu is re-displayed, press [Esc] several times 

until you exit from the Network Parameters menu and the "Saving 

Configuration" message is displayed.

5.  After the new configuration has been saved, test the Self Signed certificate by 

accessing the Outlet Managed PDU via the Web Interface, using an HTTPS 

connection.  
a)  Before the connection is established, the Outlet Managed PDU should 

display the warning message described previously.  This indicates that 

the Self Signed certificate has been successfully created and saved.

b)  Click on the "Yes" button to proceed.  The Outlet Managed PDU will 

prompt you to enter a user name and password.  After keying in your 

password, the main menu should be displayed, indicating that you have 

successfully accessed command mode.