Casablanca Fan Company PN9943001 Manual Do Utilizador

CIRCUIT BREAKER

(TRIP BREAKER FOR THE

CIRCUIT YOU WILL BE

WORKING ON)

FUSE BOX

(REMOVE FUSE FOR THE

CIRCUIT YOU WILL BE

WORKING ON)

• The blades in each pack are matched for

equal weight to assure smooth fan operation.

If more than one fan is being installed, be

careful not to mix blades from different

cartons.

• Inspect the contents of your carton for

possible shipping or handling damage and

report any such damage directly to your

authorized Casablanca dealer.

• It is always a good idea to have an assistant

to help with the installation.

• When cleaning, painting, or working near

your fan, be very careful of the fan and

blades. Always turn the power OFF to the

ceiling fan before servicing it, working on

it, or replacing light bulbs.

• Never insert anything into the path of the

fan blades while the fan is in operation.

• Never install a fan over a pool or spa.

• Never operate a fan that has been damaged in

any way. Contact Casablanca Fan Company by

calling 1-888-227-2178, or contact your local

authorized Casablanca dealer for assistance

in obtaining service.

CONTENTS

READ AND SAVE THESE INSTRUCTIONS

• All wiring must be in accordance with the National Electric Code ANSI/NFPA 70-1993 and the appropriate local electrical

codes. The National Electric Code requires proper grounding as a precaution against electrical shock. A qualified electrician

should be consulted if you are unsure.

• This fan is designed to be installed on an existing electrical outlet box. The outlet box must be UL Listed for ceiling fan

installations, if it is not, a new box must be installed. Casablanca extension poles are available for sloped or high ceiling

installations.

• This ceiling fan requires a grounded electrical supply of 120 VAC, 60 Hz and a minimum 15 amp circuit. The maximum

current requirement for the fan with light fixture is 3.8 amps. The fan uses about 1 amp or 100 watts. Maximum light

current is 2.8 amps or 340 watts of lighting.

• Where wire nuts are employed, be sure all bare wires are within the connectors. When installing the canopy hatch, make

sure all wires are within the canopy and that no wires are being pinched.

For best performance and for your warranty to be valid,

use only genuine Casablanca blades, light fixtures, and accessories.

Safety and the proper operation of your Casablanca fan both require a thorough knowledge of the product

and proper installation; therefore, before attempting to install and operate your Casablanca fan, read this

owner’s manual completely and carefully. Retain this manual for future reference.

SAFETY FIRST

PN 9943001 RL1210

CAUTION: To avoid possible electrical shock, make certain that electricity is turned off at

the circuit breaker or fuse box before attempting any installation procedure.

″

SAFE USE

BEFORE YOU START

INTRODUCTION

MOUNTING RECOMMENDATIONS

FAN INSTALLATION

CONTROL FEATURES:

INTELI•TOUCH OPERATION

WALL CONTROL PREPARATION

OPERATION

CHANGING TRANSMITTER FREQUENCY SETTING

BEZEL REPLACEMENT