Casablanca Fan Company 38546Z Manual Do Utilizador

6

TILT THE

FAN TO

INSTALL

LAST

CANOPy

SCREW

Step 9. Tuck the wires into the canopy

with the wire nuts pointed upwards,

so that the WHITE and BLACK wires

are on opposite sides of the canopy

and all wires are clear of the canopy

opening.

Step 11. Straighten the fan, then

check to ensure that there is no

movement between the canopy and

ceiling or Hang-Tru ball and top sup-

port shaft.

Step 10. Install canopy hatch with the

last canopy screw and lock washer. To

do this, tilt the fan body away from the

hatch opening.

WIRE NUT

WHITE WIRES

(2)

GREEN WIRES

(3)

Step 8. Attach the fan wires to the

ceiling fixture outlet box wiring by

twisting the bare ends of the wires

together and then securing with a

wire nut.

Connect in this order:

• GREEN leads from mounting plate

and fan to GROUND conductor of

power source. Secure with wire

nut.

• WHITE wire from fan to white NEU-

TRAL wire in ceiling fixture outlet

box. Secure with wire nut.

• BLACK wire from fan to black (or red)

POWER wire in ceiling fixture outlet

box. Secure with wire nut.

Step 7. To hang the fan body in the

canopy, hold the fan body firmly and insert

the ball into the canopy opening. Check

that no wires were pinched. Rotate the fan

body until the slot in the ball fits into the

pin opposite the canopy opening.

PIN

SLOT

BALL

BLACK

WIRES

(2)

CANOPy

WASHER

CANOPy

SCREW

CANOPy

HATCH

Note: Fan weighs 24 lbs.

CANOPy HATCH INSTALLATION

CANOPy ELETRICAL CONNECTIONS

HANGING THE FAN