Casablanca Fan Company 6643Z Manual Do Utilizador

Step 6a. attach the fan wires to the ceiling fixture outlet

box wiring by twisting the bare ends of the wires together

and then securing with a wire nut. Test that the connection

is secure by pulling on the wire nut. Connect in this order:
Step 6b. w-85 wiring Connections

• GreeN leads from mounting plate and fan to GroUNd

conductor of power source. Secure with wire nut.

• whITe wire from fan to white NeUTral wire in ceiling

fixture outlet box. Secure with wire nut.

• Black power wire from fan to Black power wire in ceil-

ing outlet box. Secure with wire nut.

Step 6c. Pull Chain Connections

• GreeN leads from mounting plate and fan to GroUNd

conductor of power source. Secure with wire nut.

• whITe wire from fan to white NeUTral wire in ceiling

fixture outlet box. Secure with wire nut.

• Black power wire from fan to Black wire from w-81 in

ceiling outlet box and the BLUe wire form light kit. Secure

with wire nut.

• BlUe wire from fan to Yellow wire from w-81 in ceiling

outlet box. Secure with wire nut.

2 wHITe wIreS

2 BLaCk

wIre NUT

PULL CHaIN

CoNNeCTIoNS

3 GreeN wIreS

2 wHITe wIreS

2 BLaCk + 1 BLUe

w-85 CoNNeCTIoNS

Step 7. Tuck the wires into the canopy

with the wire nuts pointed upwards, so

that the wHITe and BLaCk wires are on

opposite sides of the canopy and all wires

are clear of the canopy opening.

Step 8. Install canopy hatch with the

last canopy screw and lock washer. To

do this, tilt the fan body away from the

hatch opening.

Tighten the screws firmly by hand only,

TILT THe

faN To

INSTaLL

LaST

CaNoPY

SCrew

CaNoPY

HaTCH

CaNoPY

SCrew

LoCk

waSHer

Step 9. Straighten the fan, then check

to ensure that there is no movement be-

tween the canopy and ceiling or Hang-Tru

ball and top support shaft.

CaNoPY HaTCH INSTaLLaTIoN

CaNoPY eLeCTrICaL CoNNeCTIoNS

If you will be installing an accessory light kit, also connect

the BLUe light power wire from fan to the BLaCk wires).