Casablanca Fan Company 38DHxxT Manual Do Utilizador
7
TILT THE
FAN TO
INSTALL
LAST
CANOPY
SCREW
Step 11. Tuck the wires into the
canopy with the wire nuts pointed
upwards, so that the WHITE and BLACK
wires are on opposite sides of the
canopy and all wires are clear of the
canopy opening.
Step 13. Straighten the fan, then
check to ensure that there is no
movement between the canopy and
ceiling or Hang-Tru ball and top sup-
port shaft.
Step 12. Install canopy hatch with the
last canopy screw and lock washer. To
do this, tilt the fan body away from the
hatch opening.
CANOPY HATCH INSTALLATION
WIRE NUT
WHITE WIRES
(2)
GREEN WIRES
(3)
Step 10. Attach the fan wires to the
ceiling fixture outlet box wiring by
twisting the bare ends of the wires
together and then securing with a
wire nut.
Connect in this order:
• GREEN leads from mounting plate
and fan to GROUND conductor of
power source. Secure with wire
nut.
• WHITE wire from fan to white NEU-
TRAL wire in ceiling fixture outlet
box. Secure with wire nut.
• BLACK wire from fan to black (or red)
POWER wire in ceiling fixture outlet
box. Secure with wire nut.
CANOPY ELECTRICAL CONNECTIONS
Step 9. To hang the fan body in the
canopy, hold the fan body firmly and insert
the ball into the canopy opening. Check
that no wires were pinched. Rotate the fan
body until the slot in the ball fits into the
pin opposite the canopy opening.
PIN
SLOT
BALL
BLACK WIRES
(2)
CANOPY
WASHER
CANOPY
SCREW
CANOPY
HATCH
Dimensions:
Weight:
Height
32 lbs
18
1
/
2
”
HANGING THE FAN
B
el
A
ir
®
H
Alo