Braun 33657 Manual Do Utilizador

90

All-Thread 

Mounting 

Brackets

Release System:  The lift 

cable-activated platform 

manual release is disengaged 

during shipment to prevent 

potential drive chain stretch.  

Handle the lift with care.  En-

attempting to install (raise, tilt 

or move) the lift. 

lift.  Failure to do so 

1.  Open both doors to 90°.

2.  Locate center of door opening 

(between doors).  Mark the 

center point.

3.  Transfer center point to the 

vehicle frame.  Using a front-

to-rear framing member as a 

guide, transfer the center point 

across chassis to opposite side 

front-to-rear framing member 

(must be 90° to door opening).  

Lift mounting bracket positions 

are based on this center line.

4.  Measure 20-1/4" to left and 

right of the center line to 

achieve the 40-1/2" center-to-

center spacing of all-thread 

mounting studs.  

5.  Clamp the mounting brackets 

securely in place (all-thread 

studs must be vertical). 

 

Alternative floor structures are allowed 

providing the installed lift system pass-

es all FMVSS 403 requirements.  

All-thread 

Mounting 

Brackets

A maximum distance of 16

"

 from the 

outermost mounting bracket to the 

end of the cassette.

All four mounting brackets must be 

connected to the framerails.   

All vehicles with a GVW over 6000 lbs. 

and with unmodified OEM framerails.

Maximum Floor-to-Ground 

Vehicle lift access door opening 

must meet specified dimensions.

NA 

  40-1/2"

 

34"

“DOT - Public Use Lift” verifies this platform lift 

meets the “public use lift” requirements of FMVSS 

No. 403.  This lift may be installed on all vehicles 

appropriate for the size and weight of the lift, but 

must be installed on buses, school buses, and 

multi-purpose passenger vehicles other than 

motor homes with a gross vehicle weight rating 

(GVWR) that exceeds 4,536 kg (10,000 lb).