Hunter Fan 28985 Folheto

41490-01   03/12/2009

3. Insert the chain and fan pull chain switch thr ough

the round opening on the side of the modular
accessory light kit. Thr ead the bellmouth nut over
the pull chain and hand-tighten the bellmouth
nut.

4. Reattach the patented breakaway connector to

the end of the pull chain.

5. Insert the r eversing switch into the square hole

on the side of the modular accessory light kit.
Install and tighten the two scr ews you r emoved
in Step 1, substep 1.

6. Carefully place the capacitors in the modular ac-

cessory light kit.

You have completed the assembly of the  modular
accessory light kit  and ar e ready for installing the
modular accessory light kit  to the fan.

STEP 3: INST ALLING THE ACCESSOR Y
LIGHT KIT

NOTE: Refer to Figure 3 for the steps listed below.

1. Connect the lower (mutli-wire) plug connector

from the  modular accessory light kit  to  the up-
per plug connector fr om the motor.

NOTE:  Both plug connectors ar e polarized and will
only fit together one way . Make sur e that both
connectors are properly aligned befor e connect-
ing them together . Incorr ect connection could
cause improper operation and damage to the
product.

2. Place the modular accessory light kit over the up-

per switch housing. Align the side scr ew holes in
the upper switch housing and the modular acces-
sory light kit. Attach the modular accessory light
kit to the upper switch housing with the three
#6-32 X 3/8" housing assembly screws.

STEP 4: INSTALLING THE BULBS AND
GLOBES

NOTE: Refer to Figur e 4 for the steps listed below .

1. Insert a globe into the cup.

2. Tighten the thumbscr ews manually.  Do Not

overtighten.

3. Repeat substeps 1 and 2 for the remaining three

globes.

4. Install a 13W CFL bulb into each socket.

You have completed the installation of the modular
accessory light kit.  Refer back to the “Operating
and cleaning your ceiling Your Hunter Fan” section in the 
Owner’s Manual provided with your Hunter fan for 
proper operation instructions.

CUP

THUMB-
SCREWS

GLOBE

Hunter Fan Company
7130 Goodlett Farms Pkwy.
Memphis, TN  38016
USA

Fan Speed
Switch

Capacitor

Reverse Switch

Multi-wire Plug
Connection

Capacitor

Bellmouth Nut

#6-62 Housing
Assembly Screws

Bellmouth Nut

Light Switch

Wires to Light Sockets

CAUTION

Be sur e no bare wire or wir e strands are visible after
making connections.

UPPER SWITCH
HOUSING

UPPER PLUG
CONNECTOR

HOUSING ASSEMBL Y
SCREW

LOWER PLUG
CONNECTOR

LIGHT KIT