Roberts Gorden 45 Manual Do Utilizador

17

are located and other spaces of the building.  
Turn on clothes dryers and any exhaust fans, 
such as range hoods and bathroom exhausts 
so that they shall operate at maximum speed.  
Do not operate a summer exhaust fan.  Close 
fireplace dampers.

4. Follow the lighting instructions. Place the 

appliance being inspected in operation.  Adjust 
thermostat so that the appliance will operate 
continuously.

5. For any appliance having a draft hood, test for 

draft hood appliance spillage at the draft hood 
relief opening after 5 minutes of main burner 
operation.  Use the flame of a match or candle.

6. After it has been determined that each 

appliance connected to the venting system 
properly vents when tested as outlined above, 
return doors, windows, exhaust fans, fireplace 
dampers and any other gas-burning appliances 
to their previous conditions of use.

7. If improper venting is observed during any of 

the above tests, the venting system must be 
corrected by a contractor qualified in the 
installation and service of gas-fired equipment 
or your local gas supplier.  If the venting must 
be resized, use appropriate tables in (US) 
Appendix G of NFPA 54/ANSI Z223.1 - latest 
revision, National Fuel Gas Code (US) or 
Standard CSA B149.1 Natural Gas and 
Propane Installation Code (Canada) to 
determine minimum size.  All vent corrections 

must be in accordance with the appropriate 
local codes and the NFPA 54/ANSI Z223.1 - 
latest revision, National Fuel Gas Code (US) or 
Standard CSA B149.1 Natural Gas and 
Propane Installation Code (Canada).

Vent
Terminal

4" (10 cm) 

Diameter Vent

Flashing
(By Others)

Listed
Thimble
(2" [5 cm] Clearance)

Vent Terminal

Vent

Listed

Thimble

(2" [5 cm] 

Clearance)

Flashing
(By Others)

NOTE: Vent supports not
 shown. 

12" (31 cm) 

Minimum

UHA[X] 30 - 125

4" (10 cm)

90502102