Cub Cadet 190-353-100 Manual Do Utilizador

Thank you for purchasing a Cub Cadet snow thrower attachment.  

It was carefully engineered to provide excellent performance 

when properly operated and maintained. 
Please read this entire manual prior to operating the equipment.  

It instructs you how to safely and easily set up, operate and 

maintain your machine.  Please be sure that you, and any other 

persons who will operate the machine, carefully follow the 

recommended safety practices at all times.  Failure to do so could 

result in personal injury or property damage. 
All information in this manual is relative to the most recent 

product information available at the time of printing.  Review 

this manual frequently to familiarize yourself with the machine, 

its features and operation.  Please be aware that this Operator’s 

Manual may cover a range of product specifications for various 

models. Characteristics and features discussed and/or illustrated 

in this manual may not be applicable to all models. We reserve 

the right to change product specifications, designs and 

equipment without notice and without incurring obligation.
If you have any problems or questions concerning the machine, 

phone your local Cub Cadet dealer or contact us directly.  Cub 

Cadet’s Customer Support telephone numbers, website address 

and mailing address can be found on this page. We want to 

ensure your complete satisfaction at all times.
The Cub Cadet 45-inch Snow Thrower Attachment, Model Number 

190-353, is designed for use on Cub Cadet Series 3000 Tractors. 

Contained in this manual are instructions for the  installation and 

use of the snow thrower assembly with these tractors.

Please keep this manual. The instructions in this manual explain 

the minor assembly required; installation and seasonal removal; 

and the adjustment, operating and maintenance procedures 

for the snow thrower assembly. Read this manual carefully to 

familiarize yourself with the equipment before you install and 

operate the snow thrower.
The Front Hitch System, Model 190-343-100, MUST be installed 

on the tractor to allow installation of the Snow Thrower 

Attachment. The Hydraulic Angling Kit accessory, Model 190-288-

100, for the Front Hitch System SHOULD NOT be used with the 

Snow Thrower Attachment. Accidental activation of the angling 

system could cause damage to both the snow thrower and 

tractor. 

WARNING! To increase traction and stability of the 

tractor when using the snow thrower attachment, it 

is recommended that rear wheel weights, or the rear 

weight bracket with a minimum of three suitcase 

weights, be installed on the tractor. The Rear Wheel 

Weight Kit is available through your Cub Cadet 

dealer by ordering kit number 190-412. The Rear Weight Bracket 

Kit is available as kit number 190-413, which includes only the 

bracket and mounting hardware. The individual suitcase weights 

can be ordered under part number 759-3389.
Throughout this manual, all references to right and left side of the 

machine  are observed from the operating position.

If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of 

this machine, you can seek help from the experts. Choose from the options below:

Visit us on the web at www.cubcadet.com

◊ 

Locate your nearest Cub Cadet Dealer at (877) 282-8684

◊ 

Write to Cub Cadet LLC • P.O. Box 361131 • Cleveland, OH • 44136-0019

◊ 

Before setting up and operating your new equipment, please 

locate the model plate on the equipment and record the 

information in the provided area to the right. This information 

will be necessary, should you seek technical support via our web 

site or with your local Cub Cadet dealer.