Generac QT15068KVAC Manual Do Utilizador

Página de 9
5 of 9
70 • 80 • 100 • 130 • 150 kW 
available accessories
Standby Generators
Model #
Product
Description
005632-0 - 70, 80 & 150 kW
005633-0 - 100 & 130 kW 
Cold Weather Kit
If the temperature regularly falls below 32 °F (0 °C), install a cold 
weather kit to maintain optimal battery temperature.  Kit consists of 
battery warmer with thermostat built into the wrap.
005620-0 - 70, 100 & 130 kW
005619-0 - 80 kW
005667-0 - 150 kW
Extreme Cold Weather 
Kit
Recommended where the temperature regularly falls below 32 °F (0 °C) 
for extended periods of time. For liquid cooled units only.
005651-0
Base Plug Kit
Add base plugs to the base of the generator to keep out debris.
005703-0
Paint Kit
If the generator enclosure is scratched or damaged, it is important 
to touch-up the paint to protect from future corrosion. The paint 
kit includes the necessary paint to properly maintain or touch-up a 
generator enclosure.
005660-0 - 70, 100, 130 & 150 kW
005985-0 - 80 kW 
Scheduled 
Maintenance Kit
The Liquid-Cooled Scheduled Maintenance Kits offer all the hardware 
necessary to perform complete maintenance on Generac liquid-cooled 
generators.
005928-0
Wireless Remote
Completely wireless and battery powered, Generac's wireless remote 
monitor provides you with instant status information without ever 
leaving the house.
005951-0
Advanced Wireless 
Remote
Remotely control generator functions with the advanced model’s LCD 
display. In addition to remote testing of the generator, set the exercise 
cycle and maintenance interval reminders.
006199-0
PMM Starter Kit
The PMM Starter Kit consists of a 24 VAC, field installed transformer 
that enables the use of the 24 VAC Power Management Modules 
(PMMs) and one PMM. The standard controller (without starter kit) can 
control two HVAC loads with no additional hardware. Not compatible 
with pre-wired switches.
006186-0
Power Management 
Module (50 Amps)
Power Management Modules are used in conjunction with the Smart 
Switch to increase its power management capabilities. It gives the 
Smart Switch additional power management flexibility not found in any 
other transfer switch. Not compatible with pre-wired switches. Note: 
PMM Starter Kit required.
006463-0
Mobile Link™
Generac's Mobile Link allows you to check the status of your generator 
from anywhere that you have access to an Internet connection from a 
PC or with any smart device. You will even be notified when a change in 
the generator’s status occurs via e-mail or text message. Note: Harness 
Adapter Kit required.
006478-0
Harness Adapter Kit
The Harness Adapter Kit is required to make liquid-cooled units 
compatible with Mobile Link™.