Yamaha MU80 Manual Do Utilizador

MULTI MODE

5 5

For TG300B mode:

The settings normal and drumS1 … S4 are available; drum cannot be
selected. When normal is selected, either the basic or the extended set
of Voices (for the TG300B mode) can be used for the Part.

For C/M mode:

The Part Mode settings are fixed in this mode and cannot be changed:
Parts 10 and 26 are set to drumS1, and all other Parts are set to nor-
mal. The MIDI Receive Channel setting for Parts 1 and 17 is set to off.
The 128 Voices of C/M Type 1 can be used for Parts 1 … 9 and 17 …
25; the 64 Voices of C/M Type 2 can be used for Parts 11 … 16 and 27
… 32.

For PFM (Performance) mode:

All four Parts are set to normal; none of the drum settings are avail-
able. Any of the basic or the extended set of Voices can be used for each
Part.

N O T E

When two or more different Parts are set to the same editable drum setup (drumS1 … S4),

any edits made to that drum setup automatically affect all those Parts. For example, when

two Parts are set to drumS1, any changes made to drumS1 affect both Parts.

Mono/Poly Mode

Height of bars indicates selected Mono/Poly Mode setting for each
Part. (A single bar indicates “mono” setting, while full height indicates
“poly.”)

  Selected Part and MIDI channel

Settings: mono,  poly
Default: poly

This determines whether the Part’s Voice is played monophonically
(only one note at a time) or polyphonically (up to 64 notes at a
time). This parameter is not available when the Part Mode is set to
Drum.