Yamaha MU128 Manual Do Utilizador
72
MU128 Guided Tour
Single Part Controls — Selecting Different
Voices for the Performance
In this next section, you’ll use the Single Part controls to change the Voice
settings of the Performance.
settings of the Performance.
Operation
1 Call up the Single Part controls.
Simultaneously press both [PART
-/+] buttons.
PART BANK/PGM# VOL
EXP PAN
REV CHO VAR KEY
2 Select the desired Part.
Use the [PART
-/+] buttons.
Keep in mind that you should select only from the active Parts —
the ones with a dark bar in the display. Other Parts can be selected
however, they will not sound in the Performance.
the ones with a dark bar in the display. Other Parts can be selected
however, they will not sound in the Performance.
3 Select the desired bank and Voice.
Do this in the same way as you did in the Multi mode. (pages
43 and 45.)
43 and 45.)
Voice name, bank (Preset or Internal), and program
number.
number.
Note Shift
(key transpose
setting for
selected Part).
(key transpose
setting for
selected Part).
Reverb Send.
Variation Send.
Part Pan
(stereo position of selected Part).
(stereo position of selected Part).
Expression
(not available; always set to maximum).
(not available; always set to maximum).
Selected Part number. (Change this with the [PART
-/+] buttons.)
Part Volume.
Chorus Send.
Performance bank and number
Editing in the Performance Mode