Yamaha YDP-121 Manual Do Utilizador

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

YDP-121

The [FUNCTION] button provides access to a range of functions that give the

YDP-121 extraordinary versatility. The functions are categorized in groups as
follows:

Tuning ...................................................................... 24

Scale ......................................................................... 24

Dual Mode Functions .............................................. 25

Left Pedal Mode....................................................... 26

Metronome Volume ................................................. 26

Piano Song Part Cancel Volume ............................ 26

Backup Functions ................................................... 27

To Select a Function … ..............................................

Z

Press the [FUNCTION] button so that its indicator lights.

• Functions cannot be selected during demo/piano song playback or when

the recorder is in operation.

X

Use the FUNCTION [<

<

<

<

<] and [>

>

>

>

>] buttons to select the desired

function.

FUNCTION

TEMPO

FUNCTION

FUNCTION

TEMPO

FUNCTION

C

In the case of the Scale (F2), Dual Mode (F3), and Backup (F7)
functions, you will have to press the [+/YES] button once to enter
the respective sub-mode after the function has been selected, and
then use the FUNCTION [<

<

<

<

<] and [>

>

>

>

>] buttons again to select the

desired sub-function.

• The Dual mode must be engaged before the F3 function can be selected.

If the Dual mode is not engaged, “F3.-” will appear on the display and the
Dual sub-mode will not be available.

V

Set the function as required by using the [–/NO] and [+/YES]
buttons (see the individual function descriptions, below).

• After selecting the function, the current setting will be displayed when the

[–/NO] or [+/YES] button is pressed for the first time.

B

Press the [FUNCTION] button so that its indicator goes out to exit from
the function mode.

●

 Operation Example

Press [+/YES]

Use FUNCTION [

<

], [

>

]

Press [–/NO] or [+/YES]
once

Use [–/NO], [+/YES]

21