Yamaha Music Production Synthesizer Manual Do Utilizador

Utility mode

● [F6]-[SF2] Plug-in board  MIDI

From this display you can set various MIDI-related 
parameters for the Plug-in board.

Determines the MIDI Device Number of the Plug-in 
Board. This number must match the Device Number of the 
external MIDI device when transmitting/receiving bulk 
data, parameter changes or other system exclusive 
messages to/from it. 
❏ Settings

1~16, all, off

Determines the MIDI Port number over which the Plug-in 
board receives MIDI data.One port can be set for the 
Multi-part Plug-in board and two ports can be set for the 
Single part Plug-in board. 
❏ Settings

off, 1~3

n The Port number for the Effect Plug-in board (VH) 

is fixed to 1. 

Determines whether “GM on” and “XG on” messages are 
recognized (on) or not (off) . This parameter is available only 
when the Multi-part Plug-in board has been installed to slot 3. 

❏ Settings

on, off

● [F6]-[SF3] Plug-in board

From this display you can set the Native System 
parameters of the Plug-in board installed to slot 1.

For details on these parameters, refer to the owner’s 
manual of your particular Plug-in board.

● [F6]-[SF4] Plug-in board

From this display you can set the Native System 
parameters of the Plug-in board installed to slot 2.  
For details on these parameters, refer to the owner’s 
manual of your particular Plug-in board.

● [F6]-[SF5] Plug-in board

From this display you can set the Native System 
parameters of the Plug-in board installed to slot 3.  
For details on these parameters, refer to the owner’s 
manual of your particular Plug-in board.

In this Mode, you can restore your MOTIF’s User 
memory (SRAM, see page 64 ) to the factory default 
settings (Factory Set). 
When you restore the factory default settings, all the 
current settings for all the User voices and 
performances on the User Memory will be overwritten 
with the factory defaults.
Make sure you are not overwriting any important data. 
You should back up any important data to memory 
card/SCSI device beforehand.

◆ Factory Set (Restore Factory 

  In the Utility mode, press the [JOB] button to enter 

the Utility Job mode.

  Press the [ENTER] button.  (The display prompts 

you for confirmation.)

  Press the [INC/YES] button to execute the Job. 

After the Job has been completed, a “Completed” 
message appears and operation returns to the 
original display.

n To cancel the Job, press the [DEC/NO] button.

  Press the [UTILITY] button to exit from the 

Utility Job mode back to the Utility mode. 

n All settings in the Utility mode that are related to 

the Plug-in boards and the mLAN8E are stored 
only to the memory on those respective devices, 
and not to the User memory of the MOTIF.  
Because of this, the Factory Set operation cannot be 
used to restore settings for those devices.