Yamaha O2R Manual Do Utilizador
144
Automix
02R User’s Guide
Automix Main
Basic automix functions are controlled using the Automix Main page
shown below.
shown below.
The top row of this page consists of the timecode counter, the current free
memory size, shown in a bargraph, kilobytes, and percentage, and the
size of the current memory buffer and the undo buffer.
memory size, shown in a bargraph, kilobytes, and percentage, and the
size of the current memory buffer and the undo buffer.
The second row has automix offset and internal timecode generator start
time parameters.
time parameters.
In the third row, you set the frame rate (30, 30D (drop frame), 25, or 24)
and select the Time Reference (SMPTE, MTC, INT (internal SMPTE), or
MIDI (MIDI Clock).
and select the Time Reference (SMPTE, MTC, INT (internal SMPTE), or
MIDI (MIDI Clock).
The fourth row allows you to set the Automix ENABLE and select the
real-time edit Overwrite status (FADER, CH ON, PAN, EQ,
SURROUND).
real-time edit Overwrite status (FADER, CH ON, PAN, EQ,
SURROUND).
In the fifth row, you set the Edit Out END/RET and select the Fader Edit
Mode (ABSOLUTE or RELATIVE). At the end of the row is the UNDO
icon, which allows you to undo the last edit operation.
Mode (ABSOLUTE or RELATIVE). At the end of the row is the UNDO
icon, which allows you to undo the last edit operation.
The bottom row contains the automix transport icons. Select from the
following:
following:
•
AUTOREC
—recording starts when the 02R receives timecode.
•
REC
—places the 02R in record ready mode.
•
PLAY
—starts playback of the automix program when timecode is
received.
•
STOP
—stops recording or playback.
•
ABORT
—stops recording and discards any data recorded.
1.
Use the [AUTOMIX]
button to locate the
AUTOMIX 1/7 page.
button to locate the
AUTOMIX 1/7 page.
2.
Select the “INT Start
Time” with the CURSOR
buttons and set the
desired value by
rotating the encoder
wheel.
Time” with the CURSOR
buttons and set the
desired value by
rotating the encoder
wheel.
3.
Use the CURSOR buttons
to select the desired
“Frame” rate check box
and press the [ENTER]
button.
to select the desired
“Frame” rate check box
and press the [ENTER]
button.
4.
Select a “TC Input”
check box with the
CURSOR buttons and
press the [ENTER] button.
check box with the
CURSOR buttons and
press the [ENTER] button.
5.
Use the CURSOR buttons
to select the “Automix”
ENABLE check box and
press the [ENTER] button
to change its value.
to select the “Automix”
ENABLE check box and
press the [ENTER] button
to change its value.
6.
Select the “Overwrite”
status check boxes with
the CURSOR buttons
and press the [ENTER]
button.
status check boxes with
the CURSOR buttons
and press the [ENTER]
button.
7.
Use the CURSOR buttons
to select the “Edit Out”
END or RET check box
and press the [ENTER]
button to change its
value.
to select the “Edit Out”
END or RET check box
and press the [ENTER]
button to change its
value.
8.
Select a “Fader Edit
Mode” check box with
the CURSOR buttons
and press the [ENTER]
button.
Mode” check box with
the CURSOR buttons
and press the [ENTER]
button.
AUTOMIX