Yamaha O2R Manual Do Utilizador

Página de 414
Installing Options
229
02R User’s Guide
Digital Cascade Kit (CD8-CS)
The digital cascade kit (CD8-CS) is used to connect two or more 02Rs 
together. The kit consists of two cascade I/O cards and a special cable. 
When two or more 02Rs are connected together, they share the output 
buses 1 through 8, four auxiliary buses (two paired buses, AUX A and 
AUX B), the stereo bus, and the solo bus.
Installing the CD8-CS
The cascade I/O card (CD8-CS) is a single slot card. At least one cascade 
I/O card should be installed in each 02R. If you are connecting more than 
two 02Rs, the middle units should have two cards. The cascade I/O cards 
should be installed in SLOT3 or SLOT4. You should reserve SLOT1 and 
SLOT2 for digital I/O cards.
1.
Set the IN/OUT switch of the cascade I/O card installed in the first 
02R to the IN position.
This 02R will be the cascade master.
2.
Set the IN/OUT switch of the cascade I/O card installed in the 
second 02R to the OUT position.
This 02R will be the cascade slave.
02R cascade slave (Word clock slave)
75
switch
ON
02R cascade slave (Word clock slave)
75
switch
ON
SLOT 1
SLOT 2
Digital MTR 
(Word clock master)
Digital MTR 
(Word clock slave)
Digital MTR 
(Word clock slave)
Digital MTR 
(Word click 
slave)
SLOT 2
SLOT 1
SYNC
SYNC
SYNC
SLOT 4 SLOT 4
WORD CLOCK OUT
WORD
CLOCK
IN
WORD
CLOCK
IN
WORD
CLOCK
OUT
OUT
IN
CD8-CS