Yamaha O2R Manual Do Utilizador

Secondary Recording Tutorial

The 02R has eight aux sends.

AUX 7 and AUX 8 are used to feed the internal effects processors, with the 
signal remaining entirely in the digital domain.

The other auxiliary sends—AUX 1 through AUX 6—can be used to feed 
external signal processors and effects units, foldback amplifiers, or 
multitrack recording equipment. AUX 5 and AUX 6 can also be used to 
construct a monitor mix, and routed directly to either the studio or control 
room monitors. When a send is used to feed an external effects processor, 
the processed signal can be returned via one of the stereo input channels or 
an unused input channel.

There are two different ways to access the auxiliary send channels:

•

The [AUX 1] to [AUX 6] buttons access the AUX 1 to 6 pages, which 
display the aux send level controls and pre/post icons. 

•

The [AUX 7] and [AUX 8] buttons access the AUX 7 and 8 pages, which 
are used with the internal effects processors: Effect 1 and Effect 2.

When an AUX button is pressed, the faders and rotary encoders control aux 
send levels, not channel levels.

These buttons and controls set the aux send levels for the selected channel.

•

The [AUX 1] to [AUX 8] buttons allow you to select the aux buses you 
want to send the selected channel signal to.

•

The SEND LEVEL rotary encoder is used to set the level—indicated by 
the adjacent LED bargraph.

•

The [ON] button is used to turn the send on or off.