Yamaha MW12 Manual Do Utilizador
Front & Rear Panels
MW12 Owner’s Manual
17
English
Master Control Section
1
ST Master Fader
Adjusts the signal level to the ST OUT jacks.
n The stereo master fader has no effect on the signal
being sent to the computer via the USB interface.
2
GROUP 1-2 Fader
Adjusts the signal level to the GROUP OUT 1 and
GROUP OUT 2 jacks.
GROUP OUT 2 jacks.
3
TO ST Switch
If this switch is on (
), the mixer sends the signals
processed by the GROUP 1-2 fader (
2) onto the Stereo
bus. The Group 1 signal goes to Stereo L and the Group
2 signal goes to Stereo R.
2 signal goes to Stereo R.
4
Master SEND
• Master AUX 1/2 Control
Adjusts the signal level, respectively. These are the
signals that are output to the AUX1 and AUX2 SEND
jacks.
signals that are output to the AUX1 and AUX2 SEND
jacks.
5
RETURN
• AUX 1/2 Control
Adjust the level of the mixed L/R signal sent from the
RETURN jacks (L (MONO) and R) to the AUX1 and
AUX2 buses.
RETURN jacks (L (MONO) and R) to the AUX1 and
AUX2 buses.
• ST Control
Adjust the level of the signal sent from the RETURN
jacks (L (MONO) and R) to the Stereo bus.
jacks (L (MONO) and R) to the Stereo bus.
n If you supply a signal to the RETURN L (MONO) jack
only, the mixer outputs the identical signal to both the L
and R Stereo buses.
and R Stereo buses.
6
2TR IN/USB Control
Adjusts the level of signals received via 2TR IN, as well
as the level of signals received by the MW12 from the
computer via the USB interface.
as the level of signals received by the MW12 from the
computer via the USB interface.
2
#
)
1
@
4
5
6
!
7
8
3
9