Yamaha S90 ES Manual Do Utilizador
Quic
k Guide
Connecting the Computer and Midi de
vices
Connections
63
Owner’s Manual
Connections
Connecting to External Audio Equipment
Since the S90 ES has no built-in speakers, you'll need an external audio system or a set of stereo headphones to properly
monitor it. Alternatively, you could use a pair of headphones.
There are several methods of connecting to external audio equipment, as described in the following illustrations.
monitor it. Alternatively, you could use a pair of headphones.
There are several methods of connecting to external audio equipment, as described in the following illustrations.
Audio Output
■
Connecting stereo powered speakers
Hooking up a pair of powered speakers lets you hear accurate reproduction of the instrument's rich sounds with their own
pan and effect settings. Connect the powered speakers to the OUTPUT L/MONO and R jacks on the rear panel.
pan and effect settings. Connect the powered speakers to the OUTPUT L/MONO and R jacks on the rear panel.
n When using just one powered speaker, connect it to the OUTPUT L/MONO jack on the rear panel.
■
Connecting to a Mixer
There are extra audio outputs in addition to the main OUTPUT (L/MONO and R) jacks. Connect these outputs to a mixer for
separately controlling and processing individual Drum Key sounds or Parts. Installing the mLAN16E expands the output
capabilities with sixteen addition digital outputs, over a single FireWire (IEEE 1394) connector/cable. For details on how to
set the Part/output jack assignments, refer to the chart below.
separately controlling and processing individual Drum Key sounds or Parts. Installing the mLAN16E expands the output
capabilities with sixteen addition digital outputs, over a single FireWire (IEEE 1394) connector/cable. For details on how to
set the Part/output jack assignments, refer to the chart below.
Outputting separate notes (keys) of a Drum Voice
This is done from the OutputSel parameter (as selected below) as Drum Voice data.
This setting is available for Parts for which the OutputSel parameter is set to “drum” in another mode (e.g., Performance or
Multi).
Multi).
Outputting separate Parts of a Performance
This is done from the OutputSel parameter (as selected below).
Assigning an audio input Part of a Performance to an output is done from the OutputSel parameter (as selected below).
Outputting separate Parts of a Multi
This is done from the OutputSel parameter (as selected below).
Assigning an audio input Part of a Multi to an output is done from the OutputSel parameter (as selected below).
Connecting the Computer and MIDI devices
[VOICE]
→
Drum Voice selection
→
[EDIT]
→
Drum Key selection
→
[F1] OSC
→
[SF2] OUTPUT
→
[PERFORM]
→
Performance selection
→
[EDIT]
→
Part selection
→
[F2] OUTPUT
→
[SF3] SELECT
→
[PERFORM]
→
Performance selection
→
[EDIT]
→
[COMMON]
→
[F5] AUDIO IN
→
[SF1] OUTPUT
→
[MULTI/SEQ PLAY] (selecting Multi mode)
→
Multi selection
→
[EDIT]
→
Part selection
→
[F2] OUTPUT
→
[SF3] SELECT
→
[MULTI/SEQ PLAY] (selecting Multi mode)
→
Multi selection
→
[EDIT]
→
[COMMON]
→
[F5] AUDIO IN
→
[SF1] OUTPUT
→
S90 ES
OUTPUT L/MONO
OUTPUT R
PHONES
Powered speaker (Left)
Powered speaker (Right)
Headphones