Yamaha MOTIF-RACK Manual Do Utilizador

There are 124 preset multis in the Multi Library 
divided into two banks. In one bank, Parts of the 
Multis have the same Receive channel and can be 
played by layered voices from a connected keyboard.  In 
the other bank, each Part has been set for optimum use 
as a multi-part, ensemble performance.  When you 
want to create a new Multi, just select a Multi from the 
Multi Library and customize it as needed.

n For information on the Multi Library, refer to the 

separate Data List.

Here we’ll show how to use the Multi Library.

Simultaneously hold down the [SHIFT] button and 
press the [LIBRARY] button to enter the Multi Library.

The Perf (Performance) bank and Multi bank are 
available.

• Perf (Performance) bank
The Multis in this bank are convenient for playing 
layered voices with a connected keyboard, since all 
Parts of the Multi (up to four) are assigned the same 
receive channel.

n MIDI Receive Channel is set with the “BasicRcvCh” 

parameter (Ref. #152) in the Utility mode.

n The Receive Channels for Parts 5 to 16 are set to off 

automatically. If you want to use Parts 5 - 16, make sure 
to set appropriate receive channel with the “RcvCh” 
parameter (Ref. #32) in the Multi Part Edit mode.

n When you play the Performance with the connected 

keyboard, the volume is controlled in two ways.  
Reception of MIDI Main Volume messages (Control #7, 
page 78) sets the volume of all Parts to the same value, 
and reception of MIDI Expression messages (Control 
#11, page 78) independently adjusts the volume of each 
Part while maintaining the overall Part balance.

• Multi bank
Multis in this bank are designed for use with an 
external sequencer in playing back song data.  The 
Parts of the Multi in this bank are assigned to different 
MIDI Receive Channels.

n For details about MIDI Channel, refer to page 77.

n If a Note On message is received from a connected 

keyboard or sequencer, you can hear the selected Multi.

Simultaneously hold down the [SHIFT] button and 
press the [ENTER] button.  A confirmation message 
appears, prompting you to execute the copy operation 
or cancel it.

Simultaneously hold down the [SHIFT] button and 
press the [ENTER] button again to execute the 
operation.  (A “Completed” message appears when 
finished.)

E

F