Yamaha MOTIF-RACK Manual Do Utilizador

You can store (save) your original parameter settings to 
User memory, as shown below.

When you perform this, the settings for the destination 
data will be overwritten. Important data should always 
be backed up to computer or some other storage device 
(page 56).

When changing the Voice/Multi name, refer to page 58.

Once you’ve edited a Voice or Multi, simultaneously 
hold down the [SHIFT] button and press the [STORE] 
button.
The Store display appears.

Simultaneously hold down the [SHIFT] button and 
press the [ENTER] button. At the prompt, 
simultaneously hold down [SHIFT] and press enter 
again to execute the Job, or press the [EXIT] button to 
cancel.

A “Completed” Message appears when the data has 
been stored, and operation returns to the original 
display.

n You can press the [EXIT] button to cancel the Store 

operation and return to the original screen.

Never attempt to turn off the power while data is being 
stored (while an “Executing...” or “Please keep power 
on” message is shown). Turning the power off in this 
state results in loss of all user data.

 

If you alter any parameters, the   indicator will 
appear in the top right of the display. This indicates 
that the current Voice/Multi has been modified but 
not yet stored.

When you select another program number or 
another mode, the   indicator will disappear and 
all edited data will be lost. You should always save 
your edited data with the Store function.

E

F

Destination Voice Number

Destination Bank

Edit indicator