Yamaha MOTIF7 Manual Do Utilizador

Be sure to handle Memory Cards with care.  Follow the 
important precautions below.

* SmartMedia is a trademark of Toshiba Corporation.

■  Compatible Memory Card Type
3.3V(3V) Memory Cards can be used. 5V type Memory 
Cards are not compatible with this instrument. 

■  Memory Capacity
There are five types of Memory Cards: 2MB/4MB/
8MB/16MB/32MB. A Memory Card with the memory 
capacity exceeding 32MB can also be used if it 
conforms to the standards of SSFDC (Solid State 
Floppy Disk Card: another name of SmartMedia) 
Forum. 

■  Inserting/Removing Memory Cards

Hold the Memory Card so that the connector 
section (gold) of the Memory Card is facing 
downward and forward, towards the Memory 
Card slot. Carefully insert the Memory Card into 
the slot, slowly pushing it all the way in until it is 
fitted in place.

n Don’t insert the Memory Card in wrong direction.

Don’t insert anything other than a Memory Card in 
the slot. 

Before removing the Memory Card, be sure to 
confirm that the Memory Card is not in use, or it 
is not being accessed by the instrument. Then pull 
the Memory Card out slowly by hand. If the 
Memory Card is being accessed*, a message 
indicating that it is in use appears on the 
instrument's display. 

* It includes saving, loading, formatting, deleting and 

making directory. Also, be aware that the instrument will 
automatically access the Memory Card to check the 
media type when it is inserted while the instrument is 
turned on.

Never attempt to remove the Memory Card or turn the 
power off during accessing. Doing so can damage the 
data on the instrument/Memory Card and possibly the 
Memory Card itself. 

■  Formatting Memory Cards
Before using a Memory Card with your instrument it 
must first be formatted. Once it is formatted all data on 
it will be erased. Be sure to check if the data is 
unnecessary for you or not, beforehand.

n The Memory Cards formatted with this instrument may 

become unusable with other instruments.

■  About the Memory Cards

There are times when static electricity affects 
Memory Cards. Before you handle Memory Cards, 
to reduce the possibility of static electricity, touch 
the metal parts such as a door knob and aluminum 
sash. Be sure to remove the Memory Card from the 
Memory Card slot when it is not in use for a long time.
Do not expose the Memory Card to direct 
sunlight, extremely high or low temperatures, or 
excessive humidity, dust or liquids. 
Do not place heavy objects on a Memory Card or bend 
or apply pressure to the Memory Card in any way. 
Do not touch the metal part (gold) of the Memory 
Card or put any metallic plate onto the metal part.
Do not expose the Memory Card to magnetic 
fields, such as those produced by televisions, 
speakers, motors, etc., since magnetic fields can 
partially or completely erase data on the Memory 
Card, rendering it unreadable.
Do not attach anything other than the provided 
labels to a Memory Card. Also make sure that 
labels are attached in the proper location.

To prevent inadvertent erasure of important data, 
stick the write-protect seal (provided in the 
Memory Card package) onto the designated area 
(within a circle) of the Memory Card. Conversely 
speaking, to save data on the Memory Card, make 
sure to remove the write-protect seal from the Card.
Do not reuse the seal that is peeled off.

■  Data Backup
For maximum data security Yamaha recommends that 
you keep two copies of important data on separate 
Memory Cards. This gives you a backup if one Memory 
Card is lost or damaged.

■  Burglarproof Lock
This instrument is equipped with a burglarproof lock 
for the Memory Card. If necessity arises, mount the 
burglarproof lock onto the instrument.

To mount the burglarproof lock:

1 Remove the metallic part using a Phillips 

screwdriver.

2 Turn the metallic part upside down and  then 

mount it again.