Yamaha TYROS Manual Do Utilizador
MIDI
Reference
147
TYROS Owner’s Manual
145
■ MIDI messages which can be transmitted or received (recognized)
.................
The following MIDI messages can be set on the TRANSMIT/RECEIVE display.
● NOTE..................................................................................................page 105
● CC (Control Change)........................................................................page 105
● PC (Program Change) ......................................................................page 105
● PB (Pitch Bend) ................................................................................page 105
● AT (Aftertouch) .................................................................................page 105
MIDI Receive Settings
The explanations here apply when you call up the RECEIVE page in step #5 of the Basic Procedure on page 145. This determines
which parts will receive MIDI data and over which MIDI channels the data will be received.
which parts will receive MIDI data and over which MIDI channels the data will be received.
■ MIDI transmission/reception via the USB terminal and MIDI terminals
............
The relationship between the MIDI terminals and the USB terminal which can be used for transmitting/
receiving 32 channels (16 channels x 2 ports) of the MIDI messages is as follows:
receiving 32 channels (16 channels x 2 ports) of the MIDI messages is as follows:
The dots corresponding to each
channel (1 - 16) flash briefly when-
ever any data is received on the
channel(s).
channel (1 - 16) flash briefly when-
ever any data is received on the
channel(s).
Turns reception of the specified data type of the
selected channel on or off.
selected channel on or off.
Determines the part to which the received MIDI messages of
the selected channel are assigned. With the exception of the
two parts below, see page 134 for details about the parts.
the selected channel are assigned. With the exception of the
two parts below, see page 134 for details about the parts.
• KEYBOARD
The received note messages control the TYROS’ key-
board performance.
board performance.
• EXTRA PART1 - 4
There are four parts specially reserved for receiving and
playing MIDI data. Normally, these parts are not used by
the instrument itself. The TYROS can be used as a 32-
channel multi-timbral tone generator by using these four
parts in addition to the parts (except for the microphone
sound) described on page 134.
playing MIDI data. Normally, these parts are not used by
the instrument itself. The TYROS can be used as a 32-
channel multi-timbral tone generator by using these four
parts in addition to the parts (except for the microphone
sound) described on page 134.
Select a channel. The TYROS can
receive MIDI messages over 32 chan-
nels (16 channels x 2 ports).
receive MIDI messages over 32 chan-
nels (16 channels x 2 ports).
● MIDI reception
● MIDI transmission
MIDI A IN
terminal
USB
connector
MIDI B IN
terminal
MIDI A OUT
terminal
USB
connector
MIDI B OUT
terminal
Port handling
USB2
USB1
Merge
Merge
MIDI A01 - 16
MIDI B01 - 16
MIDI A01 - 16
MIDI B01 - 16