Yamaha DME4io-ES Manual Do Utilizador

You can initialize the DME Satellite internal memory.
Select one of the following initialization types:

All scenes, preset parameter settings and WAVE files except components and files saved via the File Storage func-
tion will be deleted. The Utility settings will be set to default values.

All stored component, scene, preset parameter settings, WAVE files, and files saved via the File Storage function 
will be deleted. The Utility settings will be set to default. Use this initialization type if the internal data is damaged 
or corrupted. After initialization, transfer necessary components from DME Designer.

Four [PEAK] indicators on the upper row on the front panel light up during the initialization process. Four 
[SIGNAL] indicators on the lower row of the front panel flash when the initialization process is complete. Four 
[PEAK] indicators on the lower row of the front panel flash if the initialization process fails.

When initialization is complete, reset the dip switch to its previous position (page 16), 
then turn off and on the power to the unit.

Do NOT turn off the power to the DME Satellite during the initialization process to prevent possible 
damage to the device.

Be sure to reset the dip switch to the previous position to prevent possible damage to the device.

Initialize DME:

Delete All Data: