Yamaha RS7000 Manual Do Utilizador
2. Creating Pattern Chains (Pattern Chain Recording)
RS7000
163
3
The P
attern Chain Mode
Allows events to be recorded to the BPM track one at a time.
Step recording can only be applied to the BPM track. Displays
and operation are the same as for BPM track recording in the
SONG mode.
Step recording can only be applied to the BPM track. Displays
and operation are the same as for BPM track recording in the
SONG mode.
Step Recording Procedure
1.
Press [PATT CHAIN] to go to the PATTERN CHAIN Play
mode.
mode.
2.
Use [Knob 1] (CHAIN) to select the chain number to be
recorded.
recorded.
3.
Press [REC] to engage the record standby mode.
4.
Use [Knob 1] (REC TRACK) to select the BPM track to be
recorded.
recorded.
5.
Use [Knob 3] (REC TYPE) to select the STEP record mode.
6.
Press [PLAY] so that its indicator lights and the Step Record-
ing display appears.
ing display appears.
7.
Use [Knob 1] (POINTER) to move the pointer to the position
at which you want to enter a BPM change, [Knob 2] (STEP)
to set the step length, and [Knob 3] (BPM) to set the BPM
value.
When you need to make large value changes rotate the knob
while holding the [SHIFT] button to change values in incre-
ments of 10 rather than 1.
at which you want to enter a BPM change, [Knob 2] (STEP)
to set the step length, and [Knob 3] (BPM) to set the BPM
value.
When you need to make large value changes rotate the knob
while holding the [SHIFT] button to change values in incre-
ments of 10 rather than 1.
8.
Enter the specified value by pressing any key on the key-
board.
board.
9.
If you press the [PLAY] button the [PLAY] indicator will
flash and you will be able to hear how your step-recorded
chain is shaping up. Press [STOP] to stop playback.
flash and you will be able to hear how your step-recorded
chain is shaping up. Press [STOP] to stop playback.
10.
Stop recording and return to the SONG Play mode by press-
ing the [STOP] button.
ing the [STOP] button.
Display Parameters
1
Beat Graph
This is the display in which events are “placed” during step
recording.
When the meter is 4/4, the display is divided into 4 beats (one
measure). Each diamond-shaped marker in the display repre-
sents 1 32
recording.
When the meter is 4/4, the display is divided into 4 beats (one
measure). Each diamond-shaped marker in the display repre-
sents 1 32
nd
beat (each 1/4 note division is divided into 8
32
nd
beats).
2
POINTER
...... [Knob 1], [SHIFT]+[F1]
→ Numeric Keypad
Sets the data entry position.
The triangular pointer above the beat graph indicates the data
entry position. Rotate [Knob 1] to move the left or right.
Measure numbers can be specified numerically by using
[SHIFT] + [F1] + numeric keypad.
The triangular pointer above the beat graph indicates the data
entry position. Rotate [Knob 1] to move the left or right.
Measure numbers can be specified numerically by using
[SHIFT] + [F1] + numeric keypad.
3
STEP (Step Time)
.......... [Knob 2], [SHIFT]+[F2]
→ Numeric Keypad
[Settings]
Settings made via the knob
0001 ~ 0059, 32
nd
note
, 16
th
note triplet
,
16
th
note
, 8
th
note triplet
, 8
th
note
,
1/4 note triplet
, 1/4 note
, half note
,
whole note
Settings made via the numeric keypad
0001 ~ 9999 clocks
Specifies the step time: the size of the step the pointer will
move to the next position after an event is entered.
move to the next position after an event is entered.
4
BPM
....... [Knob 3], [F3], [SHIFT]+[F3]
→ Numeric Keypad
[Settings] 001.0 ~ 300.0
Specifies the BPM value to be entered.
5
REST
............................................................................... [F1]
When [F1] is pressed the pointer will move by the specified
step time.
step time.
6
DELETE
.......................................................................... [F3]
Use [Knob1] (POINTER) while holding [F3] to delete all
events the pointer passes.
events the pointer passes.
7
BACK DELETE
........................................................... [F4]
Moves the pointer backward by one step and deletes all
events at that location.
events at that location.
Step Recording
3
4
1
2
2
5
6
7
[Knob 1]
[SHIFT]+[F1]
[SHIFT]+[F1]
[Knob 3]
[F3]
[SHIFT]+[F3]
[F3]
[SHIFT]+[F3]
[F1]
[F4]
[F3]
[Knob 2]
[SHIFT]+[F2]
[SHIFT]+[F2]
NOTE
Mistakenly entered events can be erased by
pressing [F4] immediately after they are entered
(before changing the step time value).
pressing [F4] immediately after they are entered
(before changing the step time value).