Yamaha III Manual Do Utilizador
Chain Mode [CHAIN]
Reference
134
DTXTREME III Owner’s Manual
Ref
erence
Dr
um Kit mode
um Kit mode
Song mode
Clic
k mode
T
rigger mode
File mode
Utility mode
Chain mode
Sampling mode
7
Press the [ENTER/STORE] button.
The display prompts you for confirmation. To cancel the Store
operation, press the [DEC/NO] button.
operation, press the [DEC/NO] button.
8
Press the [INC/YES] button to execute the
Store operation.
Store operation.
This feature is useful when you want to call up multiple
Steps simultaneously (for example, calling up the Drum
Kit number and tempo simultaneously). In the [F2] EDIT
display in the Chain mode, enter the checkmark(s) to the
checkbox(es) at left of the Step number(s) following the
first Step number of the group.
Steps simultaneously (for example, calling up the Drum
Kit number and tempo simultaneously). In the [F2] EDIT
display in the Chain mode, enter the checkmark(s) to the
checkbox(es) at left of the Step number(s) following the
first Step number of the group.
Example 1)
The Steps below are called up via 01
The Steps below are called up via 01
→ 02 → 03 → 04 →
05 in order.
Example 2)
The Steps below are called up via 01 and 02
The Steps below are called up via 01 and 02
→ 03 and 04
→ 05 in order.
The settings of Steps 01 and 02 are called up simulta-
neously when this Chain is selected. Selecting the next
Step (Step 03) calls up the settings of Steps 03 and 04, then
selecting the next Step calls up the settings of Step 05.
The settings of Steps 01 and 02 are called up simulta-
neously when this Chain is selected. Selecting the next
Step (Step 03) calls up the settings of Steps 03 and 04, then
selecting the next Step calls up the settings of Step 05.
Example 3)
The Steps below are called up via 01
The Steps below are called up via 01
→ 02, 03 and 04 →
05.
The settings of the Steps 01 are called up when this Chain
is selected. Selecting the next Step calls up the settings of
Steps 02 – 04 simultaneously.
The settings of the Steps 01 are called up when this Chain
is selected. Selecting the next Step calls up the settings of
Steps 02 – 04 simultaneously.
Naming the created Chain
[F3] NAME
From this display, you can enter the desired name for the current chain (up to eight characters).
1
After the Chain programming is com-
pleted, press the [F3] NAME button.
pleted, press the [F3] NAME button.
2
Enter a name for the current Chain.
For detailed instructions on naming, refer to “Basic Opera-
tion” on page 15.
tion” on page 15.
1
[SF6] LIST
You can call up the Character List by pressing this button.
Refer to “Using the character list,” page 15, for more informa-
tion on name entry.
Refer to “Using the character list,” page 15, for more informa-
tion on name entry.
3
Press the [ENTER/STORE] button after
making the settings.
making the settings.
4
Select the Chain number for the destina-
tion by using the [INC/YES], [DEC/NO] but-
tons and data dial.
tion by using the [INC/YES], [DEC/NO] but-
tons and data dial.
5
Press the [ENTER/STORE] button.
The display prompts you for confirmation. To cancel the Store
operation, press the [DEC/NO] button.
operation, press the [DEC/NO] button.
6
Press the [INC/YES] button to execute the
Store operation.
Store operation.
• The edited Chain will be lost when selecting a different Chain or
turning the power off. Make sure to store the Chain data to internal
memory by pressing the [ENTER/STORE] button before selecting
a different Chain or turning the power off.
memory by pressing the [ENTER/STORE] button before selecting
a different Chain or turning the power off.
• Never attempt to turn off the power while the message “Please
keep power on” is shown. All Chain data may be lost.
Step Grouping
CAUTION
1