Yamaha III Manual Do Utilizador
Recording Your Drum Performance to a Song
Quick Guide
DTXTREME III Owner’s Manual
49
Quic
k Guide
Assigning a Name to a User Song
You can assign an original name to a User Song.
1
With the desired User Song selected, press the [F2] JOB button
followed by the [SF1] SONG button in the Song mode to call up
the SONG JOB SELECT display.
followed by the [SF1] SONG button in the Song mode to call up
the SONG JOB SELECT display.
2
Move the cursor to “03: Song Name, Tempo, Repeat” then press
the [ENTER/STORE] button to call up the Job display.
the [ENTER/STORE] button to call up the Job display.
1
Name
Determines the Song name, which can contain up to 10 characters. For detailed
instructions on naming, refer to “Basic Operation” on page 15.
instructions on naming, refer to “Basic Operation” on page 15.
B
[SF6] LIST
When the cursor is located at Name, this [LIST] icon appears at the right bottom of
the display indicating that you can call up the Character List display by holding the
[SF6] button. For details, see page 15.
the display indicating that you can call up the Character List display by holding the
[SF6] button. For details, see page 15.
3
Enter the Song name by following the instructions on page 15.
You can call up the character list by pressing the [SF6] LIST button, then select the
desired one from the list.
desired one from the list.
2
1