Yamaha CVP - 405 Manual Do Utilizador
Recalling the Registered Panel Setups
CVP-405/403/401 Owner’s Manual
130
Registering and Recalling Custom P
anel Setups
2
Press the [2π
π
π
π†
†
†
†
]–[7π
π
π
π†
†
†
†
] buttons to select items.
3
Enter checkmarks for the items to be “Frozen” (i.e., to remain
unchanged), by pressing the [8π
unchanged), by pressing the [8π
π
π
π†
†
†
†
] button.
4
Press the [FREEZE] button on the panel to turn the Freeze function
on.
on.
5
Press the [EXIT] button to exit from the operation display.
Calling Up Registration Memory Numbers in
Order—Registration Sequence
Order—Registration Sequence
As convenient as the Registration Memory buttons are, there may be times during a
performance when you want to quickly switch between settings—without having
to take your hands from the keyboard. The convenient Registration Sequence func-
tion lets you call up the eight setups in any order you specify, by simply using the
TAB [√][®] buttons or the pedal as you play.
performance when you want to quickly switch between settings—without having
to take your hands from the keyboard. The convenient Registration Sequence func-
tion lets you call up the eight setups in any order you specify, by simply using the
TAB [√][®] buttons or the pedal as you play.
1
Select the desired Registration Memory bank to program a sequence
(page 128).
(page 128).
2
Call up the operation display.
[FUNCTION]
[FUNCTION]
→ [E] REGIST SEQUENCE/FREEZE/VOICE SET →
TAB [√][®] REGISTRATION SEQUENCE
3
If you intend to use a pedal to switch Registration Memory settings,
specify here how the pedal will be used—to advance or to reverse
through the sequence.
Use the [C] button to select the pedal for advancing through the sequence.
Use the [D] button to select the pedal for reversing through the sequence.
specify here how the pedal will be used—to advance or to reverse
through the sequence.
Use the [C] button to select the pedal for advancing through the sequence.
Use the [D] button to select the pedal for reversing through the sequence.
4
Use the [E] button to determine how Registration Sequence behaves
when reaching the end of the sequence (SEQUENCE END).
STOP .....................Pressing the TAB [®] button or the “advance” pedal has
when reaching the end of the sequence (SEQUENCE END).
STOP .....................Pressing the TAB [®] button or the “advance” pedal has
no effect. The sequence is “stopped.”
TOP .......................The sequence starts again at the beginning.
NEXT BANK...........The sequence automatically moves to the beginning of
NEXT BANK...........The sequence automatically moves to the beginning of
the next Registration Memory Bank in the same folder.
5
Program the Sequence order.
The numbers shown at the lower part of the display correspond to the REG-
ISTRATION MEMORY [1]–[8] buttons on the panel.
Program the Sequence order from left to right.
The numbers shown at the lower part of the display correspond to the REG-
ISTRATION MEMORY [1]–[8] buttons on the panel.
Program the Sequence order from left to right.
CAUTION
Settings in the REGISTRATION
FREEZE display are automati-
cally saved to the instrument
when you exit from this dis-
play. However, if you turn the
power off without exiting
from this display, the settings
will be lost.
FREEZE display are automati-
cally saved to the instrument
when you exit from this dis-
play. However, if you turn the
power off without exiting
from this display, the settings
will be lost.