Yamaha CVP-87A Manual Do Utilizador

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

This chapter describes several important disk

control functions: Formatting new disks, copying
songs, and deleting songs.

■

The Clavinova uses only 3.5" 2DD floppy disks. We recommend that you use Yamaha 2DD disks. Before you can

use a new disk for recording, the disk must be “formatted” so that the Clavinova can recognize it and correctly write the
music data onto it.

Z

Insert the Disk To Be Formatted ...........................................................................................................

Insert a new blank disk. Make sure that the disk’s write protect tab is set to the

“write” position (tab closed), and insert the new disk into the disk drive unit with
the sliding door facing the drive slot and the label side of the disk facing upward.
The disk should click securely into place, and the disk drive lamp should light
briefly.

For

Pro

Write protect tab
closed (unlocked —
write enabled)

X

Engage the Format Function .................................................................................................................

Press the DISK CONTROL [FORMAT] button. The [FORMAT] button LED

will flash and “n Y ” will appear on the SONG NUMBER display.

C

Confirm the Format Operation ..............................................................................................................

Use the SONG NUMBER [▲] and [▼] buttons to select either “n” (NO) or

“Y” (YES) on the display. “Y” if you intend to execute the format operation or “n”
if you wish to cancel the operation. This step is necessary because formatting com-
pletely erases any data that is already on the disk — make sure that the disk you’re
about to format does not contain any important data!

n Y

V

Start Formatting ......................................................................................................................................

If you selected “Y” in the previous step, press the [FORMAT] button again and

formatting will begin. The number of each “track” on the disk will be shown on the
display as the format process continues (“F80” through “1”). When formatting is
complete (the display will show “1”), you can go ahead and record using the per-
formance memory, or use the COPY function (below) to copy songs or Disk Style
data to the disk.

F80