Yamaha CVP-600 Manual Do Utilizador

152

CVP-98/96/600

X

Press the desired key to be tuned.

➔

The note name and the current tuning value of the pressed key

appears.

C

Set the pitch by pressing the 

TUNE ▼ or ▲ buttons, or by using the

data dial or [–/+] buttons.  You can play the key being tuned to check
the sound during this operation.  The default tuning of 

±

0 cents can be

instantly recalled for the selected key by simultaneously pressing the
TUNE ▼ and ▲ buttons.

Scale Tuning — User
• Range:  –64 cents — +63 cents
• Basic Value:  0 (for all keys)
• Backup of last settings:  OFF

See page 140.

See page 140.

See page 141.

See page 141.

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Utility

V

Repeat steps 2 and 3 until all the required keys have been tuned.

The completed tuning can be named as a tuning file and saved to

disk.  It can also be loaded whenever necessary or deleted if not needed.

Make sure that a proper disk (either containing the scale tuning data

or set up for saving) is inserted in the disk drive before executing these
file operations.

Z

Select the desired file operation.

Use the LCD button located second from right to select the desired
file operation: 

LOAD, SAVE, DELETE or NAME.

X

Press the 

START button.

After the 

START button is pressed, the display corresponding to the

selected file operation appears.
The subsequent steps are the same as those explained on pages 140
and 141.  Refer to the pages below, depending on the selected file
operation.