Yamaha CVP-600 Manual Do Utilizador
20
20
CVP-98/96/600
Adjusting the Timbre of the Sound
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
X
Select the band (frequency range) to be adjusted.
.....
Select the band you wish to adjust by pressing the
BAND < or >
button.
➔
The central frequency of the selected band (expressed in Hz) is
shown in the
BAND
<
>
section of the display.
C
Change the value.
............................................................................................
Change the value of the gain either by pressing the
GAIN ▼ ▲ but-
tons, or by using the data dial or [–/+] buttons.
Since the value can be changed during playback, you can adjust the
settings while listening to the changes in the sound.
➔
The value is shown in the
GAIN
section of the display.
If you change the value (even slightly) when any type except
USER
is selected,
USER will be highlighted and the newly set value will
overwrite the original
USER setting.
Gain
• Range: –12 — 0 — +12 (dB)
• Range: –12 — 0 — +12 (dB)
■
EQ LOCK
ON/OFF
................................................................................................
When equalizer setting values are contained in the song data or when
the equalizer setting data is received via MIDI, the current settings in the
MASTER EQUALIZER display will overridden by the settings of the
song data or MIDI data. Set the
MASTER EQUALIZER display will overridden by the settings of the
song data or MIDI data. Set the
EQ LOCK to ON to prevent reception of
this data, or set to
OFF to enable reception.
EQ LOCK ON/OFF
• Settings: ON/OFF
• Basic setting: OFF
• Settings: ON/OFF
• Basic setting: OFF