Yamaha CVP-209 Manual Do Utilizador

The explanations here apply to step #3 on page 88.

The explanations here apply to step #3 on page 88.

The parameters are the same as for HARMONY/ECHO display of FUNCTION. For details, see page 144.

Determines the effect type (Reverb/
Chorus/DSP). 
When a regular voice is selected, the 
DSP type and Variation are set in two 
separate menus. For information on the 
effect structure, see page 126; for a list 
of available effect types, refer to the 
separate Data List.

Determines the brilliance of the tone, 
when a Natural voice is selected. This 
can also be set from the PIANO page 
(page 90), when a piano voice is 
selected.
• Metallic .........Sharp metallic tone
• Bright............Bright tone
• Normal ..........Standard tone
• Mellow ..........Soft and mellow tone
• Dark ..............Dark tone

The same as the “Mixing Console” 
on page 123.

• If you select [Bright] or 

[Metallic] as the type of 
brilliance, the volume level 
will increase slightly. In 
this case, raising the 
[MASTER VOLUME] may 
result in distortion. If this 
happens, lower the vol-
ume accordingly.

• “SPEED” parameter is 

added when selecting 
VIBE ROTOR DSP type. 
This parameter enables 
you to set the speed of 
vibrato when you select 
the Vibraphone voice, rec-
reating the effect of a vibe 
rotor pedal.

This parameter enables you to select whether the 
sound is sustained while you press the keys on 
the keyboard (“PIANO LIKE”), or the sound is 
sustained only while you press and hold down the 
sustain pedal, like playing a real vibraphone 
(“NORMAL”) (for Vibraphone voice). 

The same as the “Mixing Console” 
on page 123.

Determines the Frequency 
and Gain of the Low and 
High EQ bands.