Yamaha M3000-24 Manual Do Utilizador

 

• The M3000-40C provides a generous number of input 

modules; 40 monaural and 4 stereo (the M3000-24 
provides 24 monaural and 4 stereo). Stereo output, 16 
mix outputs, and 8 matrix outputs are provided in 
addition. The M3000 is suitable for use in a wide 
range of applications, such as the main mixer for 
sound reinforcement, as a monitor mixer, or in build-
ing installations.

• The GA Diversity function allows each pair of MIX 

buses 1/2–7/8 to be switched between group bus 
(fixed output level from the input channels) and AUX 
bus (variable output level from the input channels). 
Bus configuration can be set up as needed.

• The Scene Memory function allows the on/off status 

of the mono/stereo input channels, MIX OUT 1–16, 
and STEREO A OUT to be saved as one of 128 
“scenes.” Scenes can be selected from the front panel, 
or by MIDI program change messages from an exter-
nal device. In addition, MIDI control change mes-
sages transmitted from an external device can be used 
to switch the individual on/off status of input chan-
nels or bus outputs channels.

• By modifying internal settings, Scene Memory num-

bers 1–8 can be used as mute groups. In this case, up 
to eight mute (on/off) settings can be added/defeated 
individually.

• Eight VCA master faders allow the gain of multiple 

input channels to be controlled as a group. By group-
ing the desired input channels and assigning them to a 
VCA master fader, you can adjust the mix as appropri-
ate for the on-state action using the VCA master fad-
ers alone.

• The mono input channels provide a 26 dB pad, HPF, 

phase switch, four-band parametric EQ, and 100 mm 
full stroke faders as well as DIRECT OUT jacks. Phan-
tom power is also provided, and can be switched on/
off individually.

• The M3000-40C features a center master design that 

places the master section in the middle of the mixer 
for superior operability.

• All input channels provide a PFL switch, and an AFL 

switch is provided for MATRIX OUT 1–8/MIX OUT 
1–16/STEREO A OUT/STEREO B OUT. This makes it 
easy to check your input/output sources.

• Eight independent matrices are provided. The signals 

from MIX OUT 1–16/STEREO A OUT and dedicated 
input jacks can be mixed at the desired levels, and out-
put from MATRIX OUT jacks 1–8. This capability can 
be used for foldback or as a mix for individual speak-
ers/amps.

• All mono input channels, stereo buses, and MIX buses 

provide an INSERT I/O jack. External effect proces-
sors can be inserted as necessary.

• The talkback signal and test tone oscillators can be 

sent to any of the MIX buses 1-2–13/16 or the stereo 
buses.

• As monitor sources for the monitor output, you can 

select (in addition to STEREO A OUT), PFL from the 
input channels, AFL/PFL from MATRIX OUT 1–8/
MIX OUT 1–16/STEREO A OUT/STEREO B OUT, or 
2TR IN 1/2.