Yamaha CVP-69A Manual Do Utilizador

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

The Utility Functions

Z

X

Select the key you want to tune by pressing the key on the keyboard.

The selected key will appear on the display.

C

Use the 

TUNE

 

s

 and 

t

 buttons to tune the selected key as required.

The data dial and [+]/[–] buttons can also be used. You can play the key
being tuned to check the sound during this operation. The maximum
tuning range is 

±

100 cents (100 cents = one semitone). The normal tun-

ing (

±

0cent) for the selected key can be instantly recalled by simultane-

ously pressing the 

TUNE

 

s

 and 

t

 buttons.

V

Repeat steps 2 and 3 until all the required keys have been tuned.

• The Micro-Tuning settings are retained

in memory even when the power is
turned off if the BACKUP page TUNE/
MICRO TUNING parameter is turned
ON (page 107), otherwise all keys are
set to “0”.

■

Make sure that the disk you want to use for this operation is inserted

in the disk drive, and both the song record or playback modes are not
engaged before proceeding.

Z

Use the fourth LCD button to select the 

LOAD

, 

SAVE

, 

DELETE

, or

RENAME

 operation.

X

START

Press the 

START

 LCD button to begin the selected operation, then

proceed according to the selected operation as described below:

• The Micro Tuning Disk Operations

cannot be used when the song record
or playback mode is engaged — the
“Button not valid!” alert will be dis-
played.