Yamaha CVP-69A Manual Do Utilizador

In many cases where ▲ and ▼ or 

<

 and 

>

 LCD buttons appear, both

buttons can be pressed simultaneously to recall the default setting for that
parameter. The panel [+] and [–] buttons can be used in the same way.
This applies to most parameters that have a range of possible settings.
Parameters of this type are enclosed in a rounded frame in the display.

General Operation: The Display & Related Controls

Parameters which are directly executed or simply switched on or off

via the corresponding LCD button appear in a square frame and are not
editable via the data dial and [+]/[–] buttons.

When selecting voices (page 15) or accompaniment styles (page 28),

for example, the voice or style list that appears when a VOICE or
STYLE button is pressed will automatically disappear after a few sec-
onds if no selections are made. When this type of temporary “pop-up”
display is selected, the [DISPLAY HOLD] button will flash indicating
that the display will disappear in a few seconds. Pop-up displays can be
kept on the LCD for as long as required by pressing the [DISPLAY
HOLD] button so that its indicator lights continuously. Press [DISPLAY
HOLD] a second time (the indicator will go out) to disengage the dis-
play hold function.

• If the [DISPLAY HOLD] button is en-

gaged when a normal display is show-
ing, no pop-up displays will appear
even when a button that normally calls
a pop-up display is pressed.

• The length of time pop-up displays

remain on the LCD can be set via the
“Pop-up Time” function described on
page 109.

DISPLAY HOLD

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○