Yamaha CVP-69A Manual Do Utilizador

Custom Style

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

• During Custom Style recording, no

MIXER display is available.

Once the required quantize size has been selected press the 

START

LCD button to actually quantize the current part. Playback will stop for
an instant while the data is being quantized, then the 

START

 LCD button

will change to 

UNDO

, allowing you to undo the quantize operation and

return to the pre-quantized data if the results are not as you expected.
You will not be able to UNDO once another button has been pressed.

<

Repeat steps 3 through 7 until all parts or all sections have been re-

corded as required.

• Quantization can only be applied to the

current recording part. Quantization
cannot be executed if no part is set to
the record mode.

>

When your custom style is complete, use the PAGE buttons to select

CUSTOM STYLE page 3, and press the 

STYLE NAME

 LCD button to

go to the style naming page.

The current style name appears in the upper right corner of the dis-

play. Use the 

>

 LCD button to position the underline cursor at the char-

acter you want to change (style names can be up to 12 characters in
length). Use the data dial and/or the  [+]/[–] buttons to select the charac-
ter you want to enter from the list in the center of the display, then press
the 

c.set

 LCD button to enter the character at the current cursor posi-

tion. Repeat this procedure until your name is complete. The 

c.del

 LCD

button can be used to back up one space and delete a character.

When the name is complete press the 

OK

 LCD button to register the

name for the current custom style, or 

CANCEL

 to abort.