Yamaha CVP-69A Manual Do Utilizador

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Song Recording

N

Press the [START/STOP] or [

o

 PAUSE] button to start playback

from the current pause location, then, if the 1ST KEY mode is selected,
begin playing at the point you want to record from. Recording will begin
as soon as you begin playing on the keyboard. If the PEDAL mode is
selected press the left pedal at the point you want to record from.

V

Use the 

MODE

 LCD button to select the 1ST KEY or PEDAL punch-

in mode.

Recording will begin with the first key played after the PUNCH
IN LCD button is pressed.

Recording will begin when the left pedal is pressed after the
PUNCH IN LCD button is pressed.

B

Press the 

PUNCH IN

 LCD button to engage the punch-in record

ready mode — the 

PUNCH IN

 button will be highlighted.

• When the PEDAL punch-in mode is

selected, the left pedal is used for this
function only (the usual pedal function
is canceled).

• If you press the [START/STOP] button

or [

o

 PAUSE] button to start recording,

and the [START/STOP] button or the
PUNCH OUT LCD button to stop
recording without actually recording
anything in between, the original data
will be left untouched.

M

Press the 

PUNCH OUT

 LCD button to stop recording at the point at

which you want to “punch out”, leaving all data following the punch-out
point intact. Use the panel [START/STOP] button to stop recording if
you want all data following the punch-out point to be erased.

Press the [RECORD] button so that its indicator goes out, or the

[EXIT] button, to exit from the punch-in/out record mode.

When the PEDAL punch-in mode is
selected:
• Recording can be started directly by

pressing the left pedal while playback
is paused (without first pressing the
[START/STOP] or [PAUSE] button).

• Recording can also be stopped by

pressing the left pedal. In this case the
data following the punch-out point will
be left active.

• If you start recording by pressing the

left pedal while playback is paused,
and stop by the [START/STOP] button,
the result will be that all the data after
the punch-in point will be erased. (If
you stop by using the PUNCH OUT
LCD button or the left pedal, only the
data between the punch-in and punch-
out points will be erased.)